苏州寅旭塑化有限公司

主营产品：塑胶原料及产品、化工原料及产品

딡딡딡앸ꂂ딡삄

当前位置：首页 > 产品大全 > PA66 > PA66 > 供应阻燃PA66 FR50 25%玻纤增强

供应阻燃PA66 FR50 25%玻纤增强

价格	￥25.00/ KG
起订量	≥25
所在地	江苏苏州	可售量 10000 KG

联系人：邓先生

身份已验证

手机已验证

微信已验证

딡딡딡앸ꂂ딡삄

ꔶ딡륀-딡딡딡앸ꂂ딡삄

手机扫码快速拨号

免费会员第6年

苏州寅旭塑化有限公司

联系人：邓先生 (联系时,请说明是在全球塑胶网上看到的)

联系电话：ꔶ딡륀-딡딡딡앸ꂂ딡삄

手机号码：딡딡딡앸ꂂ딡삄

公司官网： http://18114591336.51pla.com

所在地区：江苏省苏州市

主营产品：塑胶原料及产品、化工原料及产品

扫一扫，加我微信

进入店铺

产品分类

Zytel? FR50 NC010

NYLON RESIN

PA66-GF25 FR(17)

CHARACTERISTICS

Processing

Injection Molding

Delivery form

Pellets

Additives

Lubricants, Flame retardant

Special characteristics

Flame retardant

PRODUCT TEXT

Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel? FR50 NC010 is a 25% Glass Reinforced, Flame Retardant, Polyamide 66

PRODUCT INFORMATION

DRY/COND.

TEST NORM

Resin Identification

PA66-GF25FR(17)

ISO 1043

Part Marking Code

>PA66-GF25FR(17)<

ISO 11469

ISO designation

ISO 16396-PA66,GF25 FR(17),M1F1GNR,S14-100

REGULATORY

Regulatory Information Sheet (RIS)

SVHC Declaration

ZYTEL - SVHC Statement

Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Viscosity number

150/*¹

cm3/g

ISO 307, 1157, 1628

Molding shrinkage, parallel

0.3/-

ISO 294-4, 2577

Molding shrinkage, normal

0.8/-

ISO 294-4, 2577

1: 96% Sulfuric acid

MECHANICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Tensile Modulus

10000/8000

MPa

ISO 527-1/-2

Stress at break

170/120

MPa

ISO 527-1/-2

Strain at break

2.6/3

ISO 527-1/-2

Charpy impact strength, 73°F

60/-

kJ/m2

ISO 179/1eU

Charpy impact strength, -22°F

50/-

kJ/m2

ISO 179/1eU

Charpy impact strength, -40°F

50/-

kJ/m2

ISO 179/1eU

Charpy notched impact strength, 73°F

12/13

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -22°F

12/11

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -40°C

12/10

kJ/m2

ISO 179/1eA

Poisson's ratio

0.34/0.34

THERMAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Melting temperature, 18°F/min

262/*²

°C

ISO 11357-1/-3

Temp. of deflection under load, 260 psi

240/*

°C

ISO 75-1/-2

Coeff. of linear therm. expansion, Normal, -40-23°C

55/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, Normal, 55-160°C

110/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, Parallel, -40-23°C

20/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, Parallel, 55-160°C

21/*

E-6/K

ISO 11359-1/-2

RTI, electrical, 30mil

130

°C

UL 746B

RTI, electrical, 60mil

130

°C

UL 746B

RTI, electrical, 120mil

130

°C

UL 746B

RTI, impact, 30mil

105

°C

UL 746B

RTI, impact, 60mil

115

°C

UL 746B

RTI, impact, 120mil

115

°C

UL 746B

RTI, strength, 30mil

105

°C

UL 746B

RTI, strength, 60mil

115/*

°C

UL 746B

RTI, strength, 120mil

120

°C

UL 746B

2: 1st heating

FLAMMABILITY

DRY/COND.

UNIT

TEST NORM

Burning Behav. at 60mil nom. thickn.

V-0/*

class

IEC 60695-11-10

Thickness tested

1.5/*

IEC 60695-11-10

UL recognition

yes/*

UL 94

Burning Behav. at thickness h

V-0/*

class

IEC 60695-11-10

Thickness tested

0.4/*

IEC 60695-11-10

UL recognition

yes/*

UL 94

Burning Behav. 5V at thickness h

5VA/*

class

IEC 60695-11-20

Thickness tested

1.5/*

IEC 60695-11-20

UL recognition

yes/*

UL 94

Glow Wire Flammability Index, 30mil

960/-

°C

IEC 60695-2-12

Glow Wire Flammability Index, 60mil

960/-

°C

IEC 60695-2-12

Glow Wire Flammability Index, 120mil

960/-

°C

IEC 60695-2-12

Glow Wire Ignition Temperature, 30mil

900/-

°C

IEC 60695-2-13

Glow Wire Ignition Temperature, 60mil

900/-

°C

IEC 60695-2-13

Glow Wire Ignition Temperature, 120mil

930/-

°C

IEC 60695-2-13

FMVSS Class

SE/B

ISO 3795 (FMVSS 302)

ELECTRICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Volume resistivity

>1E13/2.7E10

Ohm.m

IEC 62631-3-1

Surface resistivity

*/1.8E14³

Ohm

IEC 62631-3-2

Electric strength

24/22⁴

kV/mm

IEC 60243-1

Comparative tracking index

275/-

IEC 60112

3: dry

4: 2mm thickness

OTHER PROPERTIES

DRY/COND.

UNIT

TEST NORM

Humidity absorption, 80mil

1.3/*

Sim. to ISO 62

Density

1570/-

kg/m3

ISO 1183

Water Absorption, Immersion 24h

0.6/*⁵

Sim. to ISO 62

5: thickness,2mm

INJECTION

DRY/COND.

UNIT

Drying Recommended

yes

Drying Temperature

°C

Drying Time, Dehumidified Dryer

2 - 4

Processing Moisture Content

≤0.2

Melt Temperature Optimum

290

°C

Min. melt temperature

280

°C

Max. melt temperature

300

°C

Max. screw tangential speed

0.2

m/s

Mold Temperature Optimum

100

°C

Min. mold temperature

°C

Max. mold temperature

120

°C

Hold pressure range

50 - 100

MPa

Hold pressure time

s/mm

CHEMICAL MEDIA RESISTANCE

Acids

Acetic Acid (5% by mass), 23°C

Citric Acid solution (10% by mass), 23°C

Lactic Acid (10% by mass), 23°C

Hydrochloric Acid (36% by mass), 23°C

Nitric Acid (40% by mass), 23°C

Sulfuric Acid (38% by mass), 23°C

Sulfuric Acid (5% by mass), 23°C

Chromic Acid solution (40% by mass), 23°C

Bases

Sodium Hydroxide solution (35% by mass), 23°C

Sodium Hydroxide solution (1% by mass), 23°C

Ammonium Hydroxide solution (10% by mass), 23°C

Alcohols

Isopropyl alcohol, 23°C

Methanol, 23°C

Ethanol, 23°C

Hydrocarbons

n-Hexane, 23°C

Toluene, 23°C

iso-Octane, 23°C

Ketones

Acetone, 23°C

Ethers

Diethyl ether, 23°C

Mineral oils

SAE 10W40 multigrade motor oil, 23°C

SAE 10W40 multigrade motor oil, 130°C

SAE 80/90 hypoid-gear oil, 130°C

Insulating Oil, 23°C

Standard Fuels

ISO 1817 Liquid 1 - E5, 60°C

ISO 1817 Liquid 2 - M15E4, 60°C

ISO 1817 Liquid 3 - M3E7, 60°C

ISO 1817 Liquid 4 - M15, 60°C

Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C

Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C

Diesel fuel (pref. ISO 1817 Liquid F), 23°C

Diesel fuel (pref. ISO 1817 Liquid F), 90°C

Diesel fuel (pref. ISO 1817 Liquid F), >90°C

Salt solutions

Sodium Chloride solution (10% by mass), 23°C

Sodium Hypochlorite solution (10% by mass), 23°C

Sodium Carbonate solution (20% by mass), 23°C

Sodium Carbonate solution (2% by mass), 23°C

Zinc Chloride solution (50% by mass), 23°C

Other

Ethyl Acetate, 23°C

Hydrogen peroxide, 23°C

DOT No. 4 Brake fluid, 130°C

Ethylene Glycol (50% by mass) in water, 108°C

1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C

50% Oleic acid + 50% Olive Oil, 23°C

Water, 23°C

Water, 90°C

Phenol solution (5% by mass), 23°C

DIAGRAMS

联系方式

苏州寅旭塑化有限公司

联系人：

邓先生

服务热线：

딡딡딡앸ꂂ딡삄

ꔶ딡륀-딡딡딡앸ꂂ딡삄

公司地址：

中国江苏苏州太仓市浮桥镇华东国际塑化城9-3栋13号

该企业其他产品

供应英力士ABS Lustran 556 低光泽￥15.5元
ABS EGP-7 英力士ABS￥15.5元
英力士高光ABS Lustran 451 ￥18.5元
供应Terluran ABS GP-22 GP-35 英力士标准通用级￥13.5元
锦湖ABS HU600PF喷涂级￥21.5元
锦湖ABS H2938L耐热喷涂级￥21.5元
锦湖ABS HU651耐热耐候￥21.5元
锦湖ABS HU601耐热￥21.5元

牌号	FR50	厂商	杜邦
填充	玻纤 25%	热性能	增韧剂热稳定
加工	注塑级	产地	中国
形状	颗粒	包装	25KG
阻燃	是

供应阻燃PA66 FR50 25%玻纤增强

Zytel? FR50 NC010

PRODUCT INFORMATION

REGULATORY

RHEOLOGICAL PROPERTIES

MECHANICAL PROPERTIES

THERMAL PROPERTIES

FLAMMABILITY

ELECTRICAL PROPERTIES

OTHER PROPERTIES

INJECTION

CHEMICAL MEDIA RESISTANCE

DIAGRAMS

客服热线：

爱采购专线：

塑胶相关专线：