【切换城市】
7×24小时咨询热线：400-668-0255 我的塑胶网 会员商务室 帮助中心
苏州寅旭塑化有限公司
苏州寅旭塑化有限公司
  • 入驻年限：6年
  • 所 在 地：江苏省 苏州市
  • 主营产品： 塑胶原料及产品、化工原料及产品
进入店铺 我要询盘
vip

进入移动商铺

免费会员第 6 年 vip
苏州寅旭塑化有限公司
主营产品： 塑胶原料及产品、化工原料及产品
如实描述 用心服务 品质保障
륨퀩ꒅ홱홱
当前位置： 首页 > 产品大全 > PA66 > PA66 > 供应Zytel 70G35EF PA66-GF35

供应Zytel 70G35EF PA66-GF35

价格 ￥35000.00/吨
起订量 ≥1
所在地 江苏 苏州 可售量 10000吨
联系人： 邓 先生
身份已验证
手机已验证
微信已验证

륨퀩ꒅ홱홱

퀩ꀧ-륨퀩ꒅ홱홱

手机扫码快速拨号

手机扫码

产品推荐

免费会员 第6年

苏州寅旭塑化有限公司

联 系 人：邓 先生 (联系时,请说明是在全球塑胶网上看到的)

联系电话：퀩ꀧ-륨퀩ꒅ홱홱

手机号码：륨퀩ꒅ홱홱

公司官网： http://18114591336.51pla.com

所在地区：江苏省 苏州市

主营产品： 塑胶原料及产品、化工原料及产品

二维码

扫一扫，加我微信

进入店铺
产品分类
最新产品
商品详情 联系方式

进入手机版

基本参数

牌号 70G35EF 厂商 美国杜邦
产地 中国 加工 注塑级
阻燃 否 填充 否
颜色 本色/黑色 特点 热稳定

Zytel? 70G35EF BK538
PA66-GF35

35% glass reinforced polyamide 66 developed for electrical and electronics applications 


Zytel? 70G35EF BK538

NYLON RESIN
PA66-GF35
CHARACTERISTICS
Processing
Injection Molding
Delivery form
Pellets
Additives
Release agent
Special characteristics
Laser Weldable, Laser Markable
PRODUCT TEXT
Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

 

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

 

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.. 

 

Zytel? 70G35EF BK538 is a 35% glass reinforced polyamide 66 developed for electrical and electronics applications 

PRODUCT INFORMATION

DRY/COND.
TEST NORM
Resin Identification
PA66-GF35
ISO 1043
Part Marking Code
>PA66-GF35<
ISO 11469
ISO designation
ISO 16396-PA66,GF35,M1CGO2R,S14-110
-

REGULATORY

ZYTEL - SVHC Statement
Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Molding shrinkage, parallel
0.4/-
%
ISO 294-4, 2577
Molding shrinkage, normal
1.0/-
%
ISO 294-4, 2577
Melt viscosity , @ 1000 sec-1, 280°C
170/*
Pa.s
ISO 11443

MECHANICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Tensile Modulus
11000/8500
MPa
ISO 527-1/-2
Stress at break
200/140
MPa
ISO 527-1/-2
Strain at break
3/5
%
ISO 527-1/-2
Flexural Modulus
10000/8000
MPa
ISO 178
Flexural Strength
290/200
MPa
ISO 178
Charpy impact strength, 73°F
80/85
kJ/m2
ISO 179/1eU
Charpy impact strength, -22°F
70/70
kJ/m2
ISO 179/1eU
Charpy impact strength, -40°F
65/65
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
12/14
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -22°F
9/7
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°F
9/7
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°C
9/7
kJ/m2
ISO 179/1eA
Izod notched impact strength, 73°F
10/-
kJ/m2
ISO 180/1A
Poisson's ratio
0.34/0.34
-
-

THERMAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
260/*
°C
ISO 11357-1/-3
Glass transition temperature, 18°F/min
70/20
°C
ISO 11357-1/-2
Temp. of deflection under load, 260 psi
250/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
258/*
°C
ISO 75-1/-2
Vicat softening temperature, 90°F/h, 11 lbf
255/*
°C
ISO 306
Coeff. of linear therm. expansion, parallel
14/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
85/*
E-6/K
ISO 11359-1/-2
Thermal conductivity of melt
0.24
W/(m K)
-
Spec. heat capacity of melt
2130
J/(kg K)
-

FLAMMABILITY

DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
HB/*DS
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
Burning Behav. at thickness h
HB/*DS
class
IEC 60695-11-10
Thickness tested
0.75/*
mm
IEC 60695-11-10
Oxygen index
24/*
%
ISO 4589-1/-2
Glow Wire Flammability Index, 80mil
650/-
°C
IEC 60695-2-12
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
25
mm/min
ISO 3795 (FMVSS 302)
DS: Derived from similar grade

ELECTRICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Relative permittivity, 1MHz
4.1/4.7
-
IEC 62631-2-1
Dissipation factor, 1MHz
140/620
E-4
IEC 62631-2-1
Volume resistivity
1E12/1E9
Ohm.m
IEC 62631-3-1
Electric strength
37/36
kV/mm
IEC 60243-1
Comparative tracking index
575/-
-
IEC 60112

OTHER PROPERTIES

DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
1.7/*
%
Sim. to ISO 62
Water absorption, 80mil
5.5/*
%
Sim. to ISO 62
Density
1400/-
kg/m3
ISO 1183
Density of melt
1240
kg/m3
-

INJECTION

DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
80
°C
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
295
°C
Min. melt temperature
285
°C
Max. melt temperature
305
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
100
°C
Min. mold temperature
70
°C
Max. mold temperature
120
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm
Ejection temperature
210
°C

CHEMICAL MEDIA RESISTANCE

Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Motor oil OS206 304 Ref.Eng.Oil, ISP, 135°C
Automatic hypoid-gear oil Shell Donax TX, 135°C
Hydraulic oil Pentosin CHF 202, 125°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Diesel EN 590, 100°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
DOT No. 4 Brake fluid, 120°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C
Coolant Glysantin G48, 1:1 in water, 125°C
Urea solution (32.5% by mass), 23°C

DIAGRAMS

Viscosity-shear rate Zytel? 70G35EF BK538 1E2 1E3 1E4 Shear rate in 1/s 1E1 1E2 1E3 Viscosity in Pa.s 285 °C 295 °C 305 °C
Shearstress-shear rate Zytel? 70G35EF BK538 1E2 1E3 1E4 Shear rate in 1/s 1E4 1E5 1E6 Shearstress in Pa 285 °C 295 °C 305 °C
Stress-strain Zytel? 70G35EF BK538 (dry) B - Break 0 2 4 6 8 Strain in % 0 100 200 300 Stress in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Stress-strain Zytel? 70G35EF BK538 (cond.) B - Break 0 2 4 6 Strain in % 0 100 200 300 Stress in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Secant modulus-strain Zytel? 70G35EF BK538 (dry) B - Break 0 2 4 6 8 Strain in % 0 2000 4000 6000 8000 10000 12000 Secant modulus in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Secant modulus-strain Zytel? 70G35EF BK538 (cond.) B - Break 0 2 4 6 Strain in % 0 2000 4000 6000 8000 10000 12000 Secant modulus in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Stress-strain (isochronous) 23 °C Zytel? 70G35EF BK538 (cond.) 0 0.5 1 1.5 2 Strain in % 0 20 40 60 80 100 Stress in MPa 0.1 h 1 h 10 h 100 h 1000 h
Creep modulus-time 23 °C Zytel? 70G35EF BK538 (cond.) 1E-1 1E0 1E1 1E2 1E3 Time in h 4000 5000 6000 7000 8000 9000 Creep modulus in MPa 10 MPa 20 MPa 30 MPa 40 MPa 50 MPa 60 MPa 70 MPa 80 MPa
Stress-strain (isochronous) 100 °C Zytel? 70G35EF BK538 (dry) 0 0.2 0.4 0.6 0.8 Strain in % 0 10 20 30 40 Stress in MPa 1 h 10 h 100 h 1000 h
Creep modulus-time 100 °C Zytel? 70G35EF BK538 (dry) 1E0 1E1 1E2 1E3 Time in h 4500 5000 5500 6000 Creep modulus in MPa 5 MPa 10 MPa 15 MPa 20 MPa 25 MPa 30 MPa
Stress-strain (isochronous) 130 °C Zytel? 70G35EF BK538 (dry) 0 0.5 1 1.5 2 Strain in % 0 10 20 30 40 50 Stress in MPa 0.1 h 1 h 10 h 100 h 1000 h
Creep modulus-time 130 °C Zytel? 70G35EF BK538 (dry) 1E-1 1E0 1E1 1E2 1E3 Time in h 2000 2500 3000 3500 4000 Creep modulus in MPa 10 MPa 20 MPa 30 MPa 40 MPa 45 MPa
Stress-strain (isochronous) 150 °C Zytel? 70G35EF BK538 (dry) 0 0.5 1 1.5 2 Strain in % 0 10 20 30 40 50 Stress in MPa 0.1 h 1 h 10 h 100 h 1000 h
Creep modulus-time 150 °C Zytel? 70G35EF BK538 (dry) 1E-1 1E0 1E1 1E2 1E3 Time in h 2000 2500 3000 3500 Creep modulus in MPa 5 MPa 10 MPa 15 MPa 20 MPa 25 MPa 30 MPa 35 MPa 40 MPa
Stress-strain (isochronous) 180 °C Zytel? 70G35EF BK538 (dry) B - Break 0 1 2 3 4 Strain in % 0 20 40 60 Stress in MPa B 1 h 10 h 100 h 1000 h
Creep modulus-time 180 °C Zytel? 70G35EF BK538 (dry) 1E0 1E1 1E2 1E3 Time in h 1500 2000 2500 3000 3500 Creep modulus in MPa 10 MPa 20 MPa 30 MPa 40 MPa 50 MPa
Specific volume-temperature (pvT) Zytel? 70G35EF BK538 0 100 200 300 Temperature in °C 0.65 0.7 0.75 0.8 0.85 Spec. volume in E-3 m3/kg 0.1 MPa 40 MPa 120 MPa 200 MPa
Tensile modulus-temperature Zytel? 70G35EF BK538 (dry) -50 0 50 100 150 Temperature in °C 1E3 1E4 1E5 Tensile modulus in MPa
Tensile modulus-temperature Zytel? 70G35EF BK538 (cond.) -50 0 50 100 150 Temperature in °C 1E3 1E4 1E5 Tensile modulus in MPa
Coeff. of linear thermal expansion Zytel? 70G35EF BK538 (measured on Zytel? 70G35EF NC010) -50 0 50 100 150 200 Temperature in °C 0 5 10 15 20 25 CLTEp in E-6/K 70 80 90 100 110 120 CLTEn in E-6/K
LTHA-Stress at Break 2 mm Zytel? 70G35EF BK538 (measured on Zytel? 70G35EF NC010) 0 500 1000 1500 2000 Time in h 100 120 140 160 180 200 StressB in MPa 180 °C


该企业其他产品

  • 供应 英力士ABS Lustran 556 低光泽 ￥15.5元

  • ABS EGP-7 英力士ABS￥15.5元

  • 英力士高光ABS Lustran 451 ￥18.5元

  • 供应Terluran ABS GP-22 GP-35 英力士标准通用级￥13.5元

  • 锦湖ABS HU600PF喷涂级￥21.5元

  • 锦湖ABS H2938L耐热喷涂级￥21.5元

  • 锦湖ABS HU651耐热耐候￥21.5元

  • 锦湖ABS HU601耐热￥21.5元

供应Zytel 70G35EF PA66-GF35相关产品

猜你在找

免责声明：以上展示的供应Zytel 70G35EF PA66-GF35信息由苏州寅旭塑化有限公司自行提供，内容的真实性、准确性和合法性由发布企业负责， 全球塑胶网对此不承担责任。
风险防范建议：为保障您的利益，建议优先选择速购通会员
手机版：供应Zytel 70G35EF PA66-GF35
更新产品链接为：https://www.51pla.com/html/sellinfo/435/43532215.htm

全球塑胶网 杭州酷软科技有限公司 版权所有 © 2008-2020 www.51pla.com 浙ICP备13013211号 SEO 找商网

咨询热线:400-668-0255 公司传真：0571-87205660

浙公网安备 33010602002378号