苏州寅旭塑化有限公司

主营产品：塑胶原料及产品、化工原料及产品

핃ꐡ핃핃뙇ꌤ핧핃푵푵퉇

当前位置：首页 > 产品大全 > PA66 > PA66 > 供应杜邦PA66 70G33L 33%玻纤增强

供应杜邦PA66 70G33L 33%玻纤增强

价格	￥35000.00/吨
起订量	≥1
所在地	江苏苏州	可售量 10000吨

联系人：邓先生

身份已验证

手机已验证

微信已验证

핃ꐡ핃핃뙇ꌤ핧핃푵푵퉇

쉖ꌤ핃-핃ꐡ핃핃뙇ꌤ핧핃푵푵퉇

手机扫码快速拨号

免费会员第6年

苏州寅旭塑化有限公司

联系人：邓先生 (联系时,请说明是在全球塑胶网上看到的)

联系电话：쉖ꌤ핃-핃ꐡ핃핃뙇ꌤ핧핃푵푵퉇

手机号码：핃ꐡ핃핃뙇ꌤ핧핃푵푵퉇

公司官网： http://18114591336.51pla.com

所在地区：江苏省苏州市

主营产品：塑胶原料及产品、化工原料及产品

扫一扫，加我微信

进入店铺

产品分类

Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel? 70G33L BK031 is a 33% glass fiber reinforced polyamide 66 resin for injection molding.

PRODUCT INFORMATION

DRY/COND.

TEST NORM

Resin Identification

PA66-GF33

ISO 1043

Part Marking Code

>PA66-GF33<

ISO 11469

ISO designation

ISO 16396-PA66,GF33,M1CGR,S14-110

-

REGULATORY

Regulatory Information Sheet (RIS)

SVHC Declaration

ZYTEL - SVHC Statement

Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Molding shrinkage, parallel

0.3/-

%

ISO 294-4, 2577

Molding shrinkage, normal

1.1/-

%

ISO 294-4, 2577

MECHANICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Tensile Modulus

11000/8000

MPa

ISO 527-1/-2

Stress at break

200/140

MPa

ISO 527-1/-2

Strain at break

3/4

%

ISO 527-1/-2

Flexural Modulus

9300/-

MPa

ISO 178

Charpy impact strength, 73°F

80/80

kJ/m2

ISO 179/1eU

Charpy notched impact strength, 73°F

13/13

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -40°F

9/-

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -40°C

9/-

kJ/m2

ISO 179/1eA

Izod notched impact strength, 73°F

12/-

kJ/m2

ISO 180/1A

Izod notched impact strength, -40°F

10/-

kJ/m2

ISO 180/1A

Poisson's ratio

0.34/0.34

-

-

THERMAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Melting temperature, 18°F/min

262/*

°C

ISO 11357-1/-3

Temp. of deflection under load, 260 psi

252/*

°C

ISO 75-1/-2

Temp. of deflection under load, 65 psi

261/*

°C

ISO 75-1/-2

Coeff. of linear therm. expansion, parallel

18/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, normal

83/*

E-6/K

ISO 11359-1/-2

RTI, electrical, 30mil

130

°C

UL 746B

RTI, electrical, 60mil

130

°C

UL 746B

RTI, electrical, 120mil

130

°C

UL 746B

RTI, impact, 30mil

120

°C

UL 746B

RTI, impact, 60mil

120

°C

UL 746B

RTI, impact, 120mil

120

°C

UL 746B

RTI, strength, 30mil

130

°C

UL 746B

RTI, strength, 60mil

130/*

°C

UL 746B

RTI, strength, 120mil

130

°C

UL 746B

FLAMMABILITY

DRY/COND.

UNIT

TEST NORM

Burning Behav. at thickness h

HB/*

class

IEC 60695-11-10

Thickness tested

0.71/*

mm

IEC 60695-11-10

FMVSS Class

B

-

ISO 3795 (FMVSS 302)

Burning rate, Thickness 1 mm

35

mm/min

ISO 3795 (FMVSS 302)

ELECTRICAL PROPERTIES

DRY/COND.

TEST NORM

Comparative tracking index

600/-

IEC 60112

OTHER PROPERTIES

DRY/COND.

UNIT

TEST NORM

Humidity absorption, 80mil

1.8/*

%

Sim. to ISO 62

Water absorption, 80mil

5.7/*

%

Sim. to ISO 62

Density

1390/-

kg/m3

ISO 1183

VDA PROPERTIES

DRY/COND.

UNIT

TEST NORM

Emission of organic compounds

10

μgC/g

VDA 277

Odor test

3

class

VDA 270

INJECTION

DRY/COND.

UNIT

Drying Recommended

yes

Drying Temperature

80

°C

Drying Time, Dehumidified Dryer

2 - 4

h

Processing Moisture Content

≤0.2

%

Melt Temperature Optimum

295

°C

Min. melt temperature

285

°C

Max. melt temperature

305

°C

Max. screw tangential speed

0.2

m/s

Mold Temperature Optimum

100

°C

Min. mold temperature

70

°C

Max. mold temperature

120

°C

Hold pressure range

50 - 100

MPa

Hold pressure time

3

s/mm

Ejection temperature

210

°C

CHEMICAL MEDIA RESISTANCE

Acids

Acetic Acid (5% by mass), 23°C

Citric Acid solution (10% by mass), 23°C

Lactic Acid (10% by mass), 23°C

Hydrochloric Acid (36% by mass), 23°C

Nitric Acid (40% by mass), 23°C

Sulfuric Acid (38% by mass), 23°C

Sulfuric Acid (5% by mass), 23°C

Chromic Acid solution (40% by mass), 23°C

Bases

Sodium Hydroxide solution (35% by mass), 23°C

Sodium Hydroxide solution (1% by mass), 23°C

Ammonium Hydroxide solution (10% by mass), 23°C

Alcohols

Isopropyl alcohol, 23°C

Methanol, 23°C

Ethanol, 23°C

Hydrocarbons

n-Hexane, 23°C

Toluene, 23°C

iso-Octane, 23°C

Ketones

Acetone, 23°C

Ethers

Diethyl ether, 23°C

Mineral oils

SAE 10W40 multigrade motor oil, 23°C

SAE 10W40 multigrade motor oil, 130°C

SAE 80/90 hypoid-gear oil, 130°C

Insulating Oil, 23°C

Standard Fuels

ISO 1817 Liquid 1 - E5, 60°C

ISO 1817 Liquid 2 - M15E4, 60°C

ISO 1817 Liquid 3 - M3E7, 60°C

ISO 1817 Liquid 4 - M15, 60°C

Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C

Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C

Diesel fuel (pref. ISO 1817 Liquid F), 23°C

Diesel fuel (pref. ISO 1817 Liquid F), 90°C

Diesel fuel (pref. ISO 1817 Liquid F), >90°C

Salt solutions

Sodium Chloride solution (10% by mass), 23°C

Sodium Hypochlorite solution (10% by mass), 23°C

Sodium Carbonate solution (20% by mass), 23°C

Sodium Carbonate solution (2% by mass), 23°C

Zinc Chloride solution (50% by mass), 23°C

Other

Ethyl Acetate, 23°C

Hydrogen peroxide, 23°C

DOT No. 4 Brake fluid, 130°C

Ethylene Glycol (50% by mass) in water, 108°C

1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C

50% Oleic acid + 50% Olive Oil, 23°C

Water, 23°C

Water, 90°C

Phenol solution (5% by mass), 23°C

DIAGRAMS

联系方式

苏州寅旭塑化有限公司

联系人：

邓先生

服务热线：

핃ꐡ핃핃뙇ꌤ핧핃푵푵퉇

쉖ꌤ핃-핃ꐡ핃핃뙇ꌤ핧핃푵푵퉇

公司地址：

中国江苏苏州太仓市浮桥镇华东国际塑化城9-3栋13号

该企业其他产品

供应英力士ABS Lustran 556 低光泽￥15.5元
ABS EGP-7 英力士ABS￥15.5元
英力士高光ABS Lustran 451 ￥18.5元
供应Terluran ABS GP-22 GP-35 英力士标准通用级￥13.5元
锦湖ABS HU600PF喷涂级￥21.5元
锦湖ABS H2938L耐热喷涂级￥21.5元
锦湖ABS HU651耐热耐候￥21.5元
锦湖ABS HU601耐热￥21.5元

牌号	70G33L	厂商	美国杜邦
产地	中国	加工	注塑级
阻燃	否	填充	否
颜色	本色/黑色	特点	热稳定

供应杜邦PA66 70G33L 33%玻纤增强

PRODUCT INFORMATION

DRY/COND.

TEST NORM

Resin Identification

PA66-GF33

ISO 1043

Part Marking Code

>PA66-GF33<

ISO 11469

ISO designation

ISO 16396-PA66,GF33,M1CGR,S14-110

-

REGULATORY

Regulatory Information Sheet (RIS)

SVHC Declaration

ZYTEL - SVHC Statement

Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Molding shrinkage, parallel

0.3/-

%

ISO 294-4, 2577

Molding shrinkage, normal

1.1/-

%

ISO 294-4, 2577

MECHANICAL PROPERTIES

THERMAL PROPERTIES

FLAMMABILITY

DRY/COND.

UNIT

TEST NORM

Burning Behav. at thickness h

HB/*

class

IEC 60695-11-10

Thickness tested

0.71/*

mm

IEC 60695-11-10

FMVSS Class

B

-

ISO 3795 (FMVSS 302)

Burning rate, Thickness 1 mm

35

mm/min

ISO 3795 (FMVSS 302)

ELECTRICAL PROPERTIES

DRY/COND.

TEST NORM

Comparative tracking index

600/-

IEC 60112

OTHER PROPERTIES

DRY/COND.

UNIT

TEST NORM

Humidity absorption, 80mil

1.8/*

%

Sim. to ISO 62

Water absorption, 80mil

5.7/*

%

Sim. to ISO 62

Density

1390/-

kg/m3

ISO 1183

VDA PROPERTIES

DRY/COND.

UNIT

TEST NORM

Emission of organic compounds

10

μgC/g

VDA 277

Odor test

3

class

VDA 270

INJECTION

CHEMICAL MEDIA RESISTANCE

DIAGRAMS

客服热线：

爱采购专线：

塑胶相关专线：

供应 杜邦PA66 70G33L 33%玻纤增强

PRODUCT INFORMATION

DRY/COND. TEST NORM Resin Identification PA66-GF33 ISO 1043 Part Marking Code >PA66-GF33< ISO 11469 ISO designation ISO 16396-PA66,GF33,M1CGR,S14-110 -

REGULATORY

Regulatory Information Sheet (RIS) SVHC Declaration ZYTEL - SVHC Statement Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND. UNIT TEST NORM Molding shrinkage, parallel 0.3/- % ISO 294-4, 2577 Molding shrinkage, normal 1.1/- % ISO 294-4, 2577

MECHANICAL PROPERTIES

THERMAL PROPERTIES

FLAMMABILITY

DRY/COND. UNIT TEST NORM Burning Behav. at thickness h HB/* class IEC 60695-11-10 Thickness tested 0.71/* mm IEC 60695-11-10 FMVSS Class B - ISO 3795 (FMVSS 302) Burning rate, Thickness 1 mm 35 mm/min ISO 3795 (FMVSS 302)

ELECTRICAL PROPERTIES

DRY/COND. TEST NORM Comparative tracking index 600/- IEC 60112

OTHER PROPERTIES

DRY/COND. UNIT TEST NORM Humidity absorption, 80mil 1.8/* % Sim. to ISO 62 Water absorption, 80mil 5.7/* % Sim. to ISO 62 Density 1390/- kg/m3 ISO 1183

VDA PROPERTIES

DRY/COND. UNIT TEST NORM Emission of organic compounds 10 μgC/g VDA 277 Odor test 3 class VDA 270

INJECTION

CHEMICAL MEDIA RESISTANCE

DIAGRAMS

客服热线：

爱采购专线：

塑胶相关专线：

供应杜邦PA66 70G33L 33%玻纤增强

DRY/COND.

TEST NORM

Resin Identification

PA66-GF33

ISO 1043

Part Marking Code

>PA66-GF33<

ISO 11469

ISO designation

ISO 16396-PA66,GF33,M1CGR,S14-110

-

Regulatory Information Sheet (RIS)

SVHC Declaration

ZYTEL - SVHC Statement

Substance of Very High Concern Report

DRY/COND.

UNIT

TEST NORM

Molding shrinkage, parallel

0.3/-

%

ISO 294-4, 2577

Molding shrinkage, normal

1.1/-

%

ISO 294-4, 2577

DRY/COND.

UNIT

TEST NORM

Burning Behav. at thickness h

HB/*

class

IEC 60695-11-10

Thickness tested

0.71/*

mm

IEC 60695-11-10

FMVSS Class

B

-

ISO 3795 (FMVSS 302)

Burning rate, Thickness 1 mm

35

mm/min

ISO 3795 (FMVSS 302)

DRY/COND.

TEST NORM

Comparative tracking index

600/-

IEC 60112

DRY/COND.

UNIT

TEST NORM

Humidity absorption, 80mil

1.8/*

%

Sim. to ISO 62

Water absorption, 80mil

5.7/*

%

Sim. to ISO 62

Density

1390/-

kg/m3

ISO 1183

DRY/COND.

UNIT

TEST NORM

Emission of organic compounds

10

μgC/g

VDA 277

Odor test

3

class

VDA 270