久巨 充磁设备配件 多极充磁线圈 电机马达 转子充磁线圈 可定制款

 

喇叭磁化行业                       等一系列磁化行业

MAG" series charge / demagnetization power               

磁性材料被广泛应用于家电、汽车、铁路、航空航天、电力、钢铁等领域。MAG电容型脉冲式充磁机有着快

速高效的优点，对磁性材料的着磁基本采用此类设备。公司产品以稳定的性能，优良的安全保障，在业内树

立起品牌的标杆，深受国内外广大客户信赖。本产品采用电容作为能量集结源,脉冲式放电输出，用这种方式

得到小电流输入，大电流输出，通过充磁线圈，对磁性材料进行充磁，以PLC可编程控制器为核心的测量-

控制装置对电容充电、储能和输出等执行控制，放电周期和输出电压均可设定、调节。

（Magnetic materials are widely used in the appliance, automotive, rail, aerospace, electric power, iron and

steel and other fields.MAG capacitive pulse magnetizing machine has the advantages of fast and efficient,and

magnetic materials with magnetic basic use of such equipment. The companys products with stable performance,

excellent security in the industry to establish the benchmark of the brand by the trust of our customers at home and

abroad.This product uses capacitors as energy build-source, pulse discharge output, input this way, a small current,

high current output, through the magnetizing coils, the magnetization of magnetic materials, PLC programmable

controller as the core measurement - control means charging the capacitor, the energy storage and output execution

control discharge cycle, and the output voltage can be set and adjusted.）

 

MAG系列，高压电容式充/退磁机    

MAG series, high-voltage capacitor charge/ Demagnetization

特点：

Features:

采用光钎隔离脉冲控制技术，的电压集成控制芯片，并将充磁机内部的阻抗减低至极限状态，输出高效率的充

磁电流，并将电流衰减时间缩至到短的回路，使用一般的充磁机进行连续充磁的时候，因为充磁线圈温度的上升

导致充磁线圈的损坏，或因温度的上升导致阻抗的上升，或因充磁电流的降低导致充磁的不充分等等，L型（低阻

抗型）的产品可以将充磁线圈的热发生量抑制到原来的1/5左右，而且，对应于负荷动作的专门设定，也可以制作

超低阻抗型。

Lightthebrazingisolatedpulsecontrol technology,precisionvoltageintegratedcontrolchipandtheMagnetizerinternalimpedanceto

 reduceto the limits ofstateoutputhighefficiencyofthemagnetizingcurrent,andcurrent decaytimeisreduced tothe shortestloop,

using thegeneralmagnetizerscontinuousmagnetizingwhenthe temperature rises, becausethemagnetizingcoiltocausedamagetothemagnetizingcoils, orlead toariseinimpedanceduetothe temperature rise, orduetothedecreaseofthemagnetizingcurrentis not sufficienttocausemagnetizing,L-type (low impedance)of theproduct can beheatgeneration amountofthemagnetizingcoilis suppressed toabout1/5oftheoriginal,and,specifically setcorresponding to the loadoperation,alsocan produceultra-lowimpedance type.

 

我司可根据客户不同的要求，设计制作200-4000V,500UF—100，000UF的各种不同功率的充退磁设备。

Division I according to the different requirements of our customers, designed 200-4000V,

demagnetization 500UF-100000UF of, various power equipment.

 

产品命名规则Product Naming

MAG—□□□□/□---□

1：充磁机系列代码

   Magnetizer series code

2：大输出电压，数字乘以100

   Maximum output voltage, the number is multiplied by 100

3：大配置容量，数字乘以100

   Maximum configuration capacity, the number is multiplied by 100

4：设备特征“单充式充磁机不标注，“T”表示为退磁机，“CT”表示为充退磁一体机。

  The device features single charge-the Magnetizer not marked, "T", "CT" said one machine demagnetization Demagnetization.

5：数显式面板不标注，“Y”表示液晶触摸屏面板显示。

  The digital display panel is not marked, "Y" LCD touch screen panel displays.

6：单组电流输出不标注，数字表示电流输出组数。

  The current output of a single set of marked numbers indicate the number of current output group.

 

代表性的充磁设备型号及参数表

Representative of the magnetized device model and parameter table

充退磁机 Demagnetizationmachine	1000V-3500V系列     1000V-3500V Series
型号Model	MAG-1520	MAG-2020	MAG-2520	MAG-3550
电源Power supply	220V	220V	380V	380V
充电时间Charging time	1-1.5S	1-2.0S	1-3.0S	1-6.0S
输出电压Output voltage	DC50-1500V	DC50-2000V	DC50-2500V	DC50-3500V
电容容量Capacitance	2000UF	2000UF	2000UF	5000UF
输出能量 Output energy	2250J	4000J	6250J	30625J
大电流Maximum current	10.000A	20.000A	30.000A	40.000A
外形尺寸Maximum current	120*55*80	120*70*80	120*80*80	110*80*150
重量Weight	180KG	200KG	260KG	600KG

                      

基本性能

Basic performance

可控电压直流脉冲输出

the controllable voltage DC pulse output

电源指示、电容容量指示、输入电压指示、充电结束指示、输出电压指示、放电电流指示

The power indicator, capacitance indicates input voltage indication, the end of charge indication, indication of the output voltage, the discharge current indication

放电周次计数

discharge cycles count

外部信号控制

external signal control

紧急停止，内部放电保护（设备被打开、充电超时、待机超时）

emergency stop the internal discharge protection (the device is opened, charging timeout, standby timeout)

选用功能：

Optional features:

选用三相与两相供电（大能量设备要求提高充电速度）充退磁一体机

selection of the three-phase and two-phase power supply (large energy equipment requirements to improve the charging speed) demagnetization one

多路输出，手动充电，输出极性切换

Multiple output manually charging output polarity switch

电容器分级组合，容量采取闸刀切换

capacitor classification combination, the capacity to take the knife switch

分步放电功能（适用对材料进行定位的充磁，一般为分低、高二次充电）

Step-by-Stepdischargefunctionto locatethe material(formagnetizing,generallydivided intolow-, high-rechargeable)

反峰切除功能（推荐配合多级线圈使用）

Anti-function peak resection (Recommended with multiple coil use)

触摸屏（去除面板的指令键和表头等显示，集合在液晶屏上显示和作用）

Touch screen（Remove panel instruction key and meter etc show that set displayed on the LCD panel and role）