PBT 3318 泰科纳

PBT 3318 泰科纳PC∣201-06、PP∣3155E3、PA66∣A3WG6LS、PBT∣3330GVT、PA46∣TQ261F6、PBT∣3730G、PC∣ML7677、PA6∣KN133G33HIBL、TPE∣1045NM|1002、PC∣PZ741、PA66∣RA115、PMMA∣ST25G7、PA66∣RF0069XZ、PBT∣N2800、PA6∣DPV240H2.0、PA12∣X7229、PP∣2706A、TPU∣T465A、TPV∣9203-45、PC∣DE006P、PBT∣VSR4150、POM∣N9306、PA66∣CM3304-V0、PP∣MX00619、TPU∣180（Mica）、PP∣7471BC、TPV∣6190N∣、PA6∣KN153G15、TPU∣DP8410、PBT∣5214HF、TPE∣3022、PP∣F300A、PA66∣A216V15、PP∣N05G-00、PPS∣6165A7S、PA66∣FE4200、EVA∣PN2021、TPU∣DIPP-539S、PBT∣2300-GV1/50、PA66∣70G43L∣、TPU∣48-60/30、TPU∣58142、PC/ABS∣CM4219、POM∣S2320FC、PP∣MR2001∣、PBT 3318 泰科纳长期供应 TPU，更提高了汽车保险杠的安全性能。另外，还有高透湿性TPU、导电性TPU，并且出现了专用于生体、磁带、安全玻璃等方面的TPU。6．TPE与PVC的区别TPE—热塑性弹性体是一种具有橡胶的高弹性，高强度，高回弹性的新型材料。TPE材质触感柔软，耐候性好，不含增塑剂，是一种环保无毒的材料，价格在2.5—5万/吨之间，广泛使用在与人体接触的日用品中。PVC—聚氯乙烯，是一种有毒的含氯树脂。加工时添加了增塑剂，增塑剂的含量越大，材料越柔软，广泛的用于建材，人造皮革中，价格在0.8—1.2万元/吨之间。聚氯乙烯塑料制品在较高温度下，如50℃左右就会慢慢地分解出氯化氢气体，这种气体对人体有害。TPE与PVC相比，更耐高温和低温、有更好的弹性，近年来环保呼声越来越高，所以在很多领域节能环保的热塑性弹性体TPE开始取代PVC。TPU 134/F、TPU 201/F、TPU 315F、TPU 616/1、TPU 618/1、TPU 975U、TPU V2580、TPU V2804Long term supply of TPU improves the safety performance of automobile bumper. In addition, there are high moisture permeability TPU, conductive TPU, and TPU specially used for biological, magnetic tape, safety glass and other aspects. 6. The difference between TPE and PVC TPE thermoplastic elastomer is a new material with high elasticity, high strength and high resilience of rubber. TPE material has soft touch, good weather resistance and no plasticizer. It is an environmental friendly and non-toxic material with a price of 25000-50000 tons. It is widely used in daily necessities in contact with human body. PVC-PVC is a kind of toxic chlorine containing resin. Plasticizer is added during processing. The higher the content of plasticizer is, the softer the material is. It is widely used in building materials and artificial leather, and the price is between 8000 yuan / ton and 12000 yuan / ton. PVC plastic products in higher temperature, such as 50 ℃ will slowly decompose out of hydrogen chloride gas, this gas is harmful to human body. Compared with PVC, TPE is more resistant to high temperature and low temperature, and has better elasticity. In recent years, the voice of environmental protection is getting higher and higher. Therefore, TPE, an energy-saving and environmental friendly thermoplastic elastomer, has begun to replace PVC in many fields. TPU 134/F、TPU 201/F、TPU 315F、TPU 616/1、TPU 618/1、TPU 975U、TPU V2580、TPU V2804

PBT 3318 泰科纳PC∣CF-1050、PC/ABS∣200N、PMMA∣TX-500R-301、PP∣3860X∣、PBT∣S4090G4LS、PMMA∣B611、PC∣E-14961、PA66∣14G50、TPV∣W651B、PP∣J-330S∣、PP∣PM255、PC∣HN-3203G、PP∣JM-390、PP∣FR-160、PA6∣CM1011G-30、PMMA∣P-601∣、TPEE∣GPV82B5、PC∣5310、PMMA∣VR∣L-40、PC∣D2000AXH、PC/ABS∣NL002、TPU∣2103-80PF、PC∣KCP1000F∣、PP∣EP300L∣、PBT∣WFB62、PP∣1074KNE1、PC∣HP3NREU、EVA∣EF320、PA6∣XP36-E1、PP∣BJ360MO、TPU∣5713、PP∣7031E2、PC∣ETUV530、LCP∣E6807LHF、PA6∣PF00AIS、EVA∣LD-724、PC∣LX-7001、PC∣B7110R、LCP∣E820iPd、PBT∣433、PBT∣B3215、PP∣40MW648、TPEE∣P137DW∣、PP∣L12Z-01∣、PBT∣KP513MT25、

TPE优点1.可用一般的热塑性塑料成型机加工，不需要特殊的加工设备。2.生产效率大幅提高。可直接用橡胶注塑机硫化，时间由原来的20min左右，缩短到1min以内；由于需要的硫化时间很短，因此已可用挤出机直接硫化，生产效率大幅提高。3.易于回收利用，降低成本。生产过程中产生的废料（逸出毛边、挤出废胶）和zui终出现的废品，可以直接返回再利用；用过的TPE旧品可以简单再生之后回收利用，减少环境污染，扩大再生资源来源。4.节能。热塑性弹性体大多不需要硫化或硫化时间很短，可以有效节约能源。以高压软管生产能耗为例：橡胶为188MJ，TPE为144MJ，可节能达25%以上。5.应用领域更广。

PC‖/ABS例如ABS的易加工特性和PC‖的优良机械特性和热稳定性。二者的比率将影响PC‖/ABS材料的热稳定性。ABS塑料特点：1、综合性能较好,冲击强度较高,化学稳定性,电性能良好.PC‖/ABS2、与372有机玻璃的熔接性良好,制成双色塑件,且可表面镀铬,喷漆处理.3、有高抗冲、高耐热、阻燃、增强、透明等级别。4、流动性比HIPS差一点，比PMMA、PC‖等好，柔韧性好。5、机械性能的卓越平衡6、低温时也具备高冲击强度7、室内紫外线稳定性8、较高的热变形温度（80～125℃）9、耐燃性（UL945VB）10、色彩范围广泛11、易于注塑和挤塑，吹塑加工12、良好的电镀性13、一般密度在1.05-1.20间鉴别1.新方法：用乙酸乙酯擦，ABS不起丝，HIPS会起丝，但只是指纯的。

PBT 3318 泰科纳PP∣BJ356MO40、TPU∣501、PP∣F113G∣、PA66∣KN3321V0、PA66∣A60B02、PBT∣T7391、PC∣ML-1105、PBT∣T06204SN、PP∣SG899、PC∣SLX9271T、PBT∣B2550FC、POM∣KP004AXC、TPV∣2800B-70A∣FR、PA6∣B31F、PA66∣640PG5、PA6∣PK0049、TPU∣175A、EVA∣LD-303、POM∣GC25TF、PP∣J440、PC∣S2000U、PA12∣E50-R2、PC∣S-2000、PP∣MX91206∣、PPS∣Films、PC∣SF800Z、TPU∣58215、EVA∣UE634-04、PBT∣1662Z、PP∣C4608、PMMA∣P-600、PP∣30HM-3、PA6∣PB500、PBT∣3030-201、PP∣EP540L∣、TPE∣TE-5108、PA66∣RX02059、PBT∣T06204XL、EVA∣PE20、PP∣CZU0525、PA66∣GF50-01、PC∣310HF、PA66∣KN333G30BL、POM∣FG500AL、PP∣3443U∣、

EMA共聚物zui值得注意的性能改善（与LDPE均聚物相比较）包括：维卡（Vicat）软化温度从194°F下降为138°F；弯曲模量减小；抗环境应力断裂的性能显著提高；介电性能增强。该类材料对大多数化学品有良好的抵抗力，但不是设计作为在you机溶ji和硝酸中连续浸泡之用。3加工采用标准的LDPE薄膜挤压生产线，在约325°F的熔化温度下，很容易把EMAC加工成吹制薄膜。吹制薄膜拥有极高的急落冲击强度，而且使用传统的热熔接设备或射频方法（RF）很容易使之热熔接。Notable performance improvements of EMA copolymer Zui (compared with LDPE homopolymer) include: Vicat softening temperature decreased from 194 ° f to 138 ° f; bending modulus decreased; environmental stress fracture resistance significantly improved; and dielectric properties improved. These materials have good resistance to most chemicals, but are not designed for continuous immersion in organic solvent Ji and nitric acid. 3. The standard LDPE film extrusion line is used for processing. EMAC can be easily processed into blown film at about 325 ° f melting temperature. Blown film has very high impact strength, and it is easy to weld with traditional hot fusion equipment or RF method.

PBT 3318 泰科纳PC/ABS∣SC-253、POM∣N109WR、TPU∣A85P4666、PP∣KSR4525、PC∣EXL1464T、PA66∣A3W2G6、PC∣TC-8001B、PA66∣A3WGM53、PA6∣CM1001R、PC/ABS∣HP-1011、EVA∣FL02020、PA11∣X7421AC、ASA∣PW-997S∣、PP∣6331∣、PC∣DX91077、POM∣S9243、COC∣5013LS-01∣、PP∣J-330、PMMA∣EH、TPE∣S2002FB∣、LCP∣ZE16401、PPEH-314∣、PMMA∣SRB235、PBT∣LUX、PC/ABS∣200FT、PP∣7815E1、PMMA∣FILA72、TPV∣X6170N∣、PP∣J-320、PA66∣A60G1V25、TPV∣4445、PP∣BI518、PBT∣GP2306FY、PA6∣SX216V60、PP∣SJ-170T∣、PC∣MG49、PA66∣GYYIL、POM∣FA405、PA46∣OCD2300∣BLK、PBT∣KP211、PA6∣PB300G5、PMMA∣M30、ASA∣XC191∣、TPU∣DP9880DU、TPU∣ALRPC∣73A、

EVA树脂用途很广。一般情况下，乙酸乙烯含量在5%以下的EVA，其主要产品是薄膜、电线电缆、LDPE改性剂、胶粘剂等；乙酸乙烯含量在5%~10%的EVA产品为弹性薄膜等；乙酸乙烯含量在20~28%的EVA，主要用于热熔粘合剂和涂层制品；乙酸乙烯含量在5%~45%，主要产品为薄膜（包括农用薄膜）和片材，注塑、模塑制品，发泡制品，热熔粘合剂等。

EVA resin is widely used. In general, the main products of EVA with ethylene acetate content less than 5% are films, wires and cables, LDPE modifiers, adhesives, etc.; EVA products with ethylene acetate content of 5% ~ 10% are elastic films, etc.; EVA with ethylene acetate content of 20 ~ 28% are mainly used for hot melt adhesives and coating products; the main products of EVA with ethylene acetate content of 5% ~ 45% are films (including agricultural films) and coatings Sheet materials, injection molding, molding products, foam products, hot melt adhesives, etc.

EEA 当丙烯酸乙酯（EA）的含量增加时，共聚物将变得更坚韧、更柔软、更有弹性。高丙烯酸乙酯含量树脂的极性，增加表面吸收油墨的能力并具有粘合性质。EA含量增加，共聚物的密度和柔软随之增加。EEA聚有良好的低温性能和柔软性，加工中热稳定性好，有较大的填料收容性，优良的耐弯曲开裂及环境应力开裂性，具有较大弹性等。EEA与有机过氧化物进行交联可提高耐热性、耐蠕变性、耐溶剂性。当丙烯酸乙酯（EA）含量升高时，共聚物的上限使用温度稍有下降，透明度降低。

EEA when the content of ethyl acrylate (EA) increases, the copolymer will become more tough, softer and more elastic. The polarity of resin with high content of ethyl acrylate increases the ability of surface absorbing ink and has adhesive property. The density and softness of the copolymer increased with the increase of EA content. EEA polymer has good low temperature performance and softness, good thermal stability in processing, large filler holding capacity, excellent bending and environmental stress cracking resistance, and large elasticity. The crosslinking of EEA with organic peroxide can improve the heat resistance, creep resistance and solvent resistance. When the content of ethyl acrylate (EA) increased, the upper temperature of copolymer decreased slightly and the transparency decreased. [

PBT 3318 泰科纳PC∣7025R、PC/ABS∣KU2-1514、TPE∣1505-72D∣、PP∣C600H、PBT∣WFL36E、PP∣HF402、PC∣24UR、PBT∣B2505、EVA∣PA-442、PP∣526P、TPU∣168K、PA6∣PZ00062E、PC∣KO1372、PA6∣2710IR、PP∣HP540J∣、PA6∣C217、PC∣MX1061、PA6∣PX98038、PC∣3433R、POM∣E3120BM、PA66∣F-101、ASA∣S311、PP∣3554、PP∣1902∣、PP∣6331F∣、EVA∣2850A、PBT∣T04200、PC∣CFH2010、TPV∣4480、PC∣3258、PP∣518P、PMMA∣PX200、PC∣DCL32、PBT∣3720G、PP∣2301、PC∣8600-20、PC/ABS∣FR3030、PC∣3025G20、TPE∣4211P、PC/ABS∣GN5009F、PC∣RZ225、PA6∣KN133G33HI、PA6∣8202NL、PA12∣DN10、PC∣DFL24、

③原料技术数据

④通过认证