生物质燃烧机_中江机械设备生物质颗粒燃烧机,生物质化铝炉,生物质热风炉 生物质木屑

生物质燃烧机_大城县中江机械设备试火不回火
生物质颗粒燃烧机，燃烧成本比电节省75%、比燃油节省60%、比天然气节省50%、比液化气节省40%，且零污染。生物质燃烧机内胆，采用锆硅结晶，经高压浇注后经高温炉烧制而成，需要在1000℃以上的温度烧三天，无疏松气孔，
生物质燃烧机，一种生物质半气化自动控制燃烧机，以生物质颗粒、木屑、木粉、锯末等有机生物质为燃料的生物质高温裂解燃烧机，一般分为风冷式生物质燃烧机和水冷式生物质燃烧机两种机型。
主要特点编辑
无污染环保效益明显：以可再生生物质能源为燃料，实现能源的可持续利用。采用高温分段燃烧技术，烟气中NOX、SO2、灰尘等排放低，是燃油（气）燃烧机、电加热等很好的替代品。
无焦油、废水等各种废弃物排放：采用高温裂解燃烧技术，焦油等以气态的形式直接燃烧，解决生物质气化焦油含量高的技术难题，避免了水洗焦油带来的水质二次污染。
加热温度高：技术采用二次配风，炉压在500—700mm水柱以保证射流区正常流化。连续供料连续生产，火焰稳定，高温段温度可达1300℃，被工业广泛应用。
设备应用范围广：生物质燃烧机适用于涂装线体、电镀厂烤炉、锅炉、小型电站锅炉、工业窑炉、焚烧炉、熔炼炉、压铸机、烘干设备、厨房设备、干燥设备、食品烘干设备、熨烫设备、烤漆设备、公路筑路机械设备、工业退火炉、燃油，燃气，燃煤大吨位锅炉，沥青加热设备等各种热能行业。
投资、运行费用低：生物质燃烧机构设计合理，用于各种设备时改造费用低，运行时比燃油锅炉加热成本降低60%以上，比燃气锅炉加热成本降低40%以上，是电炉、油炉、气炉节能环保改造、更新换代的好选择。
操作简单、维护方便：采用变频自动给料，风力除灰，操作简单，工作量小，单人值班即可，生物质燃烧机是广大锅炉企业的好选择。
燃料来源广：本燃烧机以木质、木屑颗粒为原料，热值高，且避免了秸秆颗粒容易发生结焦现象的发生。
1、使用燃料：木屑颗粒或秸秆颗粒生物质燃料；
2、燃烧完全效率高：沸腾式半气化燃烧加切线旋流式配风设计，使得燃料及燃烧完全，燃烧效率可达90%以上；
3、燃烧完全、稳定：设备在微压状态下运行不发生回火和脱火现象；
4、热负荷 调节范围宽：燃烧机热负荷可在额定负荷的30%-120%范围内快速调节，起动块反应灵敏；
5、无污染环保效益明显：以可再生生物质能源为燃料，实现了能源的可持续利用。采用低温分段燃烧技术、烟气中氮的氧化物、二氧化硫、灰尘等排放低，是煤炉等的替代品；
6、无焦油、废水等各种废弃物排放：采用高温燃气直接燃烧技术，焦油等以气态的形式直接燃烧， 解决了生物质气化焦油含量高的技术难题，避免了水洗焦油带来的水质二次污染；
7、操作简单、维护方便：采用自动给料，风力除灰，操作简单，工作量小，单人值班即可；
8、投资省，运行费用低：生物质燃烧结构设计合理，用于各种锅炉时改造费用低

Biomass burner_ No tempering in fire test of Zhongjiang mechanical equipment in Dacheng County

The combustion cost of biomass pellet burner is 75% less than electricity, 60% less than fuel oil, 50% less than natural gas and 40% less than liquefied gas, and there is no pollution. The inner liner of biomass combustion machine is made of zirconium silicon crystal, high pressure pouring and high temperature furnace burning. It needs to be burned above 1000 ℃ for three days without porosity,

Biomass burner is a kind of biomass semi gasification automatic control burner, which uses biomass particles, sawdust, wood powder, sawdust and other organic biomass as fuel. It is generally divided into air-cooled biomass burner and water-cooled biomass burner.

Main features editor

No pollution and obvious environmental benefits: renewable biomass energy as fuel to achieve sustainable use of energy. Adopting high temperature staged combustion technology, the emission of NOx, SO2 and dust in flue gas is low. It is a good substitute for fuel (gas) burner and electric heating.

No tar, waste water and other waste emissions: high temperature pyrolysis combustion technology is adopted, tar is directly burned in the form of gas, which solves the technical problem of high tar content in biomass gasification and avoids the secondary pollution of water quality caused by water washing tar.

High heating temperature: the technology adopts secondary air distribution, and the furnace pressure is 500-700mm water column to ensure the normal fluidization of the jet zone. Continuous feeding, continuous production, flame stability, high temperature section temperature up to 1300 ℃, is widely used in industry.

Wide range of equipment application: biomass burner is suitable for coating line, electroplating oven, boiler, small power station boiler, industrial kiln, incinerator, melting furnace, die casting machine, drying equipment, kitchen equipment, drying equipment, food drying equipment, ironing equipment, paint equipment, road construction machinery, industrial annealing furnace, fuel oil, gas, coal-fired large tonnage boiler, Asphalt heating equipment and other thermal energy industry.

Low investment and operation cost: the design of biomass combustion mechanism is reasonable, the transformation cost is low when it is used for various equipment, the heating cost is reduced by more than 60% than that of oil fired boiler, and by more than 40% than that of gas-fired boiler, which is a good choice for energy-saving and environmental protection transformation and upgrading of electric furnace, oil furnace and gas furnace.

Simple operation and convenient maintenance: frequency conversion automatic feeding, wind ash removal, simple operation, small workload, single person on duty, biomass burner is a good choice for boiler enterprises.

Wide source of fuel: the combustion machine uses wood and sawdust particles as raw materials, with high calorific value, and avoids the coking phenomenon of straw particles.

1. Fuel used: sawdust particle or straw particle biomass fuel;

2. High combustion efficiency: the design of boiling semi gasification combustion and tangential swirl air distribution makes the fuel and combustion complete, and the combustion efficiency can reach more than 90%;

3. The combustion is complete and stable: the equipment operates under the condition of micro pressure, and there is no tempering and de ignition phenomenon;

4. Wide range of heat load regulation: the heat load of the combustion engine can be rapidly adjusted within 30% - 120% of the rated load, and the starting block is sensitive;

5. No pollution and obvious environmental benefits: renewable biomass energy as fuel, to achieve the sustainable use of energy. Low temperature staged combustion technology can reduce the emissions of nitrogen oxides, sulfur dioxide and dust in flue gas, which is a substitute for coal stoves;

6. No tar, waste water and other waste emissions: high temperature gas direct combustion technology is adopted, tar is directly burned in the form of gas, which solves the technical problem of high tar content in biomass gasification and avoids the secondary pollution of water quality caused by water washing tar;

7. Simple operation, easy maintenance: automatic feeding, wind dust removal, simple operation, small workload, single person on duty;

8. Low investment, low operation cost: biomass combustion structure design is reasonable, and the transformation cost is low when used in various boilers