【切换城市】
7×24小时咨询热线：400-668-0255 我的塑胶网 会员商务室 帮助中心
苏州寅旭塑化有限公司
苏州寅旭塑化有限公司
  • 入驻年限：6年
  • 所 在 地：江苏省 苏州市
  • 主营产品： 塑胶原料及产品、化工原料及产品
进入店铺 我要询盘
vip

进入移动商铺

免费会员第 6 年 vip
苏州寅旭塑化有限公司
主营产品： 塑胶原料及产品、化工原料及产品
如实描述 用心服务 品质保障
ꑒ꠶젡솘솘홒
当前位置： 首页 > 产品大全 > 工程塑料 > PA66 > 供应杜邦 PA66+MD40 10B140

供应杜邦 PA66+MD40 10B140

价格 ￥45.00/KG
起订量 ≥25
所在地 江苏 苏州 可售量 10000KG
联系人： 邓 先生
身份已验证
手机已验证
微信已验证

ꑒ꠶젡솘솘홒

은젡ꀓ-ꑒ꠶젡솘솘홒

手机扫码快速拨号

手机扫码

产品推荐

免费会员 第6年

苏州寅旭塑化有限公司

联 系 人：邓 先生 (联系时,请说明是在全球塑胶网上看到的)

联系电话：은젡ꀓ-ꑒ꠶젡솘솘홒

手机号码：ꑒ꠶젡솘솘홒

公司官网： http://18114591336.51pla.com

所在地区：江苏省 苏州市

主营产品： 塑胶原料及产品、化工原料及产品

二维码

扫一扫，加我微信

进入店铺
产品分类
最新产品
商品详情 联系方式

进入手机版

基本参数

牌号 10B140 厂商 杜邦
品牌 MINLON 用途级别 家电部件
销售方式 品牌经销 加工级别 注塑
厂家(产地) 美国杜邦 收缩率 1.0、1.1

Minlon? 10B140 BK061

MINERAL REINFORCED NYLON RESIN
PA66-MD40
CHARACTERISTICS
Regional availability
Processing
Injection Molding
Delivery form
Pellets
Additives
Release agent
PRODUCT TEXT
Common features of Minlon? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage.

Grades with improved electrical and flammability properties are available within the Zytel? nylon resin product line. In addition, Minlon? nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.

 

The good melt stability of Minlon? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

 

Minlon? nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.

 

Minlon? 10B140 BK061 is a 40% mineral reinforced, black polyamide 66 resin for injection molding. It has very low warpage.

PRODUCT INFORMATION

DRY/COND.
TEST NORM
Resin Identification
PA66-MD40
ISO 1043
Part Marking Code
>PA66-MD40<
ISO 11469
ISO designation
ISO 16396-PA66,MD40,M1CGR,S14-070
-

REGULATORY

Regulatory Information Sheet (RIS)
MINLON - SVHC Statement
Substance of Very High Concern Report
SVHC Declaration

RHEOLOGICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Viscosity number
138/*
cm3/g
ISO 307, 1157, 1628
Molding shrinkage, parallel
1.0/-
%
ISO 294-4, 2577
Molding shrinkage, normal
1.1/-
%
ISO 294-4, 2577

MECHANICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Tensile Modulus
6600/3800
MPa
ISO 527-1/-2
Stress at break
82/54
MPa
ISO 527-1/-2
Strain at break
3.5/9
%
ISO 527-1/-2
Tensile creep modulus, 1h
*/2100
MPa
ISO 899-1
Tensile creep modulus, 1000h
*/1300
MPa
ISO 899-1
Charpy impact strength, 73°F
35/60
kJ/m2
ISO 179/1eU
Charpy impact strength, -22°F
25/25
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
3.5/4.5
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -22°F
3.5/2
kJ/m2
ISO 179/1eA
Izod notched impact strength, 73°F
3.5/4
kJ/m2
ISO 180/1A
Poisson's ratio
0.35/0.36
-
-

THERMAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
263/*
°C
ISO 11357-1/-3
Temp. of deflection under load, 260 psi
170/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
240/*
°C
ISO 75-1/-2
Vicat softening temperature, 90°F/h, 11 lbf
245/*
°C
ISO 306
Coeff. of linear therm. expansion, parallel
65/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
90/*
E-6/K
ISO 11359-1/-2
Eff. thermal diffusivity
1.3E-7
m2/s
-
RTI, electrical, 30mil
105
°C
UL 746B
RTI, electrical, 60mil
120
°C
UL 746B
RTI, electrical, 120mil
120
°C
UL 746B
RTI, impact, 30mil
65
°C
UL 746B
RTI, impact, 60mil
105
°C
UL 746B
RTI, impact, 120mil
115
°C
UL 746B
RTI, strength, 30mil
65
°C
UL 746B
RTI, strength, 60mil
115/*
°C
UL 746B
RTI, strength, 120mil
115
°C
UL 746B

FLAMMABILITY

DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
HB/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Burning Behav. at thickness h
HB/*
class
IEC 60695-11-10
Thickness tested
0.71/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
<80
mm/min
ISO 3795 (FMVSS 302)

ELECTRICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Relative permittivity, 100Hz
4.5/9.4
-
IEC 62631-2-1
Relative permittivity, 1MHz
3.9/4.5
-
IEC 62631-2-1
Dissipation factor, 100Hz
110/2100
E-4
IEC 62631-2-1
Dissipation factor, 1MHz
230/550
E-4
IEC 62631-2-1
Volume resistivity
-/1E10
Ohm.m
IEC 62631-3-1
Surface resistivity
*/>1E15
Ohm
IEC 62631-3-2
Electric strength
40/-
kV/mm
IEC 60243-1

OTHER PROPERTIES

DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
1.6/*
%
Sim. to ISO 62
Water absorption, 80mil
5/*
%
Sim. to ISO 62
Density
1500/-
kg/m3
ISO 1183
Density of melt
1280
kg/m3
-

INJECTION

DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
80
°C
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
295
°C
Min. melt temperature
285
°C
Max. melt temperature
305
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
100
°C
Min. mold temperature
70
°C
Max. mold temperature
120
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm
Ejection temperature
210
°C
ADDITIONAL INFORMATION
Injection molding

PROCESSING

Flow front speed : 100 mm/s
 

CHEMICAL MEDIA RESISTANCE

Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C

DIAGRAMS

Viscosity-shear rate Minlon? 10B140 BK061 1E2 1E3 1E4 Shear rate in 1/s 1E1 1E2 1E3 Viscosity in Pa.s 275 °C 295 °C 315 °C
Shearstress-shear rate Minlon? 10B140 BK061 1E2 1E3 1E4 Shear rate in 1/s 1E4 1E5 1E6 Shearstress in Pa 275 °C 295 °C 315 °C
Stress-strain Minlon? 10B140 BK061 (dry) B - Break 0 5 10 15 Strain in % 0 50 100 150 Stress in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Stress-strain Minlon? 10B140 BK061 (cond.) B - Break 0 5 10 15 Strain in % 0 20 40 60 80 100 Stress in MPa B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C
Secant modulus-strain Minlon? 10B140 BK061 (dry) B - Break 0 5 10 15 Strain in % 0 5000 10000 15000 Secant modulus in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Secant modulus-strain Minlon? 10B140 BK061 (cond.) B - Break 0 5 10 15 Strain in % 0 2000 4000 6000 8000 Secant modulus in MPa B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C
Stress-strain (isochronous) 23 °C Minlon? 10B140 BK061 (cond.) B - Break 0 2 4 6 Strain in % 0 10 20 30 40 Stress in MPa B 1 h 10 h 100 h 1000 h 10000 h
Creep modulus-time 23 °C Minlon? 10B140 BK061 (cond.) 1E0 1E1 1E2 1E3 1E4 Time in h 500 1000 1500 2000 2500 Creep modulus in MPa 5 MPa 10 MPa 15 MPa 20 MPa 25 MPa 30 MPa
Stress-strain (isochronous) 60 °C Minlon? 10B140 BK061 (cond.) 0 1 2 3 4 5 Strain in % 0 10 20 30 Stress in MPa 1 h 10 h 100 h 1000 h 10000 h
Creep modulus-time 60 °C Minlon? 10B140 BK061 (cond.) 1E0 1E1 1E2 1E3 1E4 Time in h 400 600 800 1000 1200 Creep modulus in MPa 5 MPa 10 MPa 15 MPa 20 MPa
Stress-strain (isochronous) 90 °C Minlon? 10B140 BK061 (dry) 0 1 2 3 4 5 Strain in % 0 5 10 15 20 Stress in MPa 1 h 10 h 100 h 1000 h 10000 h
Creep modulus-time 90 °C Minlon? 10B140 BK061 (dry) 1E0 1E1 1E2 1E3 1E4 Time in h 400 500 600 700 800 Creep modulus in MPa 5 MPa 10 MPa 15 MPa 18 MPa
Stress-strain (isochronous) 100 °C Minlon? 10B140 BK061 (dry) 0 1 2 3 4 Strain in % 0 5 10 15 Stress in MPa 1 h 10 h 100 h 1000 h 10000 h
Creep modulus-time 100 °C Minlon? 10B140 BK061 (dry) 1E0 1E1 1E2 1E3 1E4 Time in h 300 400 500 600 700 Creep modulus in MPa 2 MPa 4 MPa 6 MPa 8 MPa 10 MPa 12 MPa 14 MPa
Stress-strain (isochronous) 120 °C Minlon? 10B140 BK061 (dry) 0 2 4 6 8 10 Strain in % 0 10 20 30 Stress in MPa 1 h 10 h 100 h 1000 h
Creep modulus-time 120 °C Minlon? 10B140 BK061 (dry) 1E0 1E1 1E2 1E3


该企业其他产品

  • 供应 英力士ABS Lustran 556 低光泽 ￥15.5元

  • ABS EGP-7 英力士ABS￥15.5元

  • 英力士高光ABS Lustran 451 ￥18.5元

  • 供应Terluran ABS GP-22 GP-35 英力士标准通用级￥13.5元

  • 锦湖ABS HU600PF喷涂级￥21.5元

  • 锦湖ABS H2938L耐热喷涂级￥21.5元

  • 锦湖ABS HU651耐热耐候￥21.5元

  • 锦湖ABS HU601耐热￥21.5元

供应杜邦 PA66+MD40 10B140 相关产品

猜你在找

免责声明：以上展示的供应杜邦 PA66+MD40 10B140 信息由苏州寅旭塑化有限公司自行提供，内容的真实性、准确性和合法性由发布企业负责， 全球塑胶网对此不承担责任。
风险防范建议：为保障您的利益，建议优先选择速购通会员
手机版：供应杜邦 PA66+MD40 10B140
更新产品链接为：https://www.51pla.com/html/sellinfo/439/43906489.htm

全球塑胶网 杭州酷软科技有限公司 版权所有 © 2008-2020 www.51pla.com 浙ICP备13013211号 SEO 找商网

咨询热线:400-668-0255 公司传真：0571-87205660

浙公网安备 33010602002378号