苏州寅旭塑化有限公司

主营产品：塑胶原料及产品、化工原料及产品

Ꝉ쐷ꝈꝈꉐ뎁잒Ꝉ데데쁶

当前位置：首页 > 产品大全 > PA6 > PA6 > 供应PA6 杜邦15%玻纤增强73G15L 73G15HSL

供应PA6 杜邦15%玻纤增强73G15L 73G15HSL

价格	￥28.00/吨
起订量	≥1
所在地	江苏苏州	可售量 10000吨

联系人：邓先生

身份已验证

手机已验证

微信已验证

Ꝉ쐷ꝈꝈꉐ뎁잒Ꝉ데데쁶

쉅뎁Ꝉ-Ꝉ쐷ꝈꝈꉐ뎁잒Ꝉ데데쁶

手机扫码快速拨号

免费会员第6年

苏州寅旭塑化有限公司

联系人：邓先生 (联系时,请说明是在全球塑胶网上看到的)

联系电话：쉅뎁Ꝉ-Ꝉ쐷ꝈꝈꉐ뎁잒Ꝉ데데쁶

手机号码：Ꝉ쐷ꝈꝈꉐ뎁잒Ꝉ데데쁶

公司官网： http://18114591336.51pla.com

所在地区：江苏省苏州市

主营产品：塑胶原料及产品、化工原料及产品

扫一扫，加我微信

进入店铺

产品分类

Zytel? 73G15L NC010

NYLON RESIN

PA6-GF15

CHARACTERISTICS

Regional availability

North America
Europe
Asia Pacific
South and Central America
Near East/Africa
Global

Processing

Injection Molding

Delivery form

Pellets

Additives

Lubricants, Release agent

PRODUCT TEXT

Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel? 73G15L NC010 is a 15% glass fiber reinforced polyamide 6 resin for injection molding.

PRODUCT INFORMATION

DRY/COND.

TEST NORM

Resin Identification

PA6-GF15

ISO 1043

Part Marking Code

>PA6-GF15<

ISO 11469

ISO designation

ISO 16396-PA6,GF15,M1GNR,S14-060

REGULATORY

Regulatory Information Sheet (RIS)

SVHC Declaration

ZYTEL - SVHC Statement

Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Viscosity number

139/*

cm3/g

ISO 307, 1157, 1628

Molding shrinkage, parallel

0.3/-

ISO 294-4, 2577

Molding shrinkage, normal

0.8/-

ISO 294-4, 2577

MECHANICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Tensile Modulus

6000/3500

MPa

ISO 527-1/-2

Stress at break

140/70

MPa

ISO 527-1/-2

Strain at break

4/10

ISO 527-1/-2

Flexural Modulus

5100/3100^DS

MPa

ISO 178

Flexural Strength

190/90^DS

MPa

ISO 178

Charpy impact strength, 73°F

50/95

kJ/m2

ISO 179/1eU

Charpy impact strength, -22°F

45/54

kJ/m2

ISO 179/1eU

Charpy notched impact strength, 73°F

7/15

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -22°F

6/14

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -40°C

6/-

kJ/m2

ISO 179/1eA

Izod notched impact strength, 73°F

6/12

kJ/m2

ISO 180/1A

Izod notched impact strength, -22°F

5/-

kJ/m2

ISO 180/1A

Izod notched impact strength, -40°F

5/-

kJ/m2

ISO 180/1A

Izod impact strength, 73°F

45/-

kJ/m2

ISO 180/1U

Izod impact strength, -40°F

40/-

kJ/m2

ISO 180/1U

Ball indentation hardness, H 961/30

210/123

MPa

ISO 2039-1

Poisson"s ratio

0.35/0.37

DS: Derived from similar grade

THERMAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Melting temperature, 18°F/min

221/*

°C

ISO 11357-1/-3

Temp. of deflection under load, 260 psi

200/*

°C

ISO 75-1/-2

Temp. of deflection under load, 65 psi

220/*

°C

ISO 75-1/-2

Vicat softening temperature, 90°F/h, 11 lbf

215/*

°C

ISO 306

Coeff. of linear therm. expansion, parallel

37/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, normal

109/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, Normal, -40-23°C

80/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, Normal, 55-160°C

100/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, Parallel, -40-23°C

34/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, Parallel, 55-160°C

15/*

E-6/K

ISO 11359-1/-2

Thermal conductivity of melt

0.19

W/(m K)

Spec. heat capacity of melt

2470

J/(kg K)

RTI, electrical, 60mil

°C

UL 746B

RTI, impact, 60mil

°C

UL 746B

RTI, strength, 60mil

65/*

°C

UL 746B

FLAMMABILITY

DRY/COND.

UNIT

TEST NORM

Burning Behav. at 60mil nom. thickn.

HB/*

class

IEC 60695-11-10

Thickness tested

1.5/*

IEC 60695-11-10

UL recognition

yes/*

UL 94

Burning Behav. at thickness h

HB/*

class

IEC 60695-11-10

Thickness tested

1.5/*

IEC 60695-11-10

UL recognition

yes/*

UL 94

Oxygen index

21/*

ISO 4589-1/-2

Glow Wire Flammability Index, 40mil

725/-

°C

IEC 60695-2-12

Glow Wire Flammability Index, 80mil

725/-

°C

IEC 60695-2-12

Glow Wire Flammability Index, 120mil

725/-

°C

IEC 60695-2-12

Glow Wire Ignition Temperature, 40mil

725/-

°C

IEC 60695-2-13

Glow Wire Ignition Temperature, 80mil

725/-

°C

IEC 60695-2-13

Glow Wire Ignition Temperature, 120mil

725/-

°C

IEC 60695-2-13

FMVSS Class

ISO 3795 (FMVSS 302)

Burning rate, Thickness 1 mm

25^DS

mm/min

ISO 3795 (FMVSS 302)

DS: Derived from similar grade

OTHER PROPERTIES

DRY/COND.

UNIT

TEST NORM

Humidity absorption, 80mil

2.5/*

Sim. to ISO 62

Water absorption, 80mil

7.6/*

Sim. to ISO 62

Density

1230/-

kg/m3

ISO 1183

Density of melt

1070

kg/m3

VDA PROPERTIES

DRY/COND.

UNIT

TEST NORM

Odor test

4^DS

class

VDA 270

Fogging, G-value (condensate)

0/*

ISO 6452

DS: Derived from similar grade

INJECTION

DRY/COND.

UNIT

Drying Recommended

yes

Drying Temperature

°C

Drying Time, Dehumidified Dryer

2 - 4

Processing Moisture Content

≤0.2

Melt Temperature Optimum

270

°C

Min. melt temperature

260

°C

Max. melt temperature

280

°C

Max. screw tangential speed

0.2

m/s

Mold Temperature Optimum

100

°C

Min. mold temperature

°C

Max. mold temperature

120

°C

Hold pressure range

50 - 100

MPa

Hold pressure time

s/mm

CHEMICAL MEDIA RESISTANCE

Acids

Acetic Acid (5% by mass), 23°C

Citric Acid solution (10% by mass), 23°C

Lactic Acid (10% by mass), 23°C

Hydrochloric Acid (36% by mass), 23°C

Nitric Acid (40% by mass), 23°C

Sulfuric Acid (38% by mass), 23°C

Sulfuric Acid (5% by mass), 23°C

Chromic Acid solution (40% by mass), 23°C

Bases

Sodium Hydroxide solution (35% by mass), 23°C

Sodium Hydroxide solution (1% by mass), 23°C

Ammonium Hydroxide solution (10% by mass), 23°C

Alcohols

Isopropyl alcohol, 23°C

Methanol, 23°C

Ethanol, 23°C

Hydrocarbons

n-Hexane, 23°C

Toluene, 23°C

iso-Octane, 23°C

Ketones

Acetone, 23°C

Ethers

Diethyl ether, 23°C

Mineral oils

SAE 10W40 multigrade motor oil, 23°C

SAE 10W40 multigrade motor oil, 130°C

SAE 80/90 hypoid-gear oil, 130°C

Insulating Oil, 23°C

Standard Fuels

ISO 1817 Liquid 1 - E5, 60°C

ISO 1817 Liquid 2 - M15E4, 60°C

ISO 1817 Liquid 3 - M3E7, 60°C

ISO 1817 Liquid 4 - M15, 60°C

Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C

Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C

Diesel fuel (pref. ISO 1817 Liquid F), 23°C

Diesel fuel (pref. ISO 1817 Liquid F), 90°C

Diesel fuel (pref. ISO 1817 Liquid F), >90°C

Salt solutions

Sodium Chloride solution (10% by mass), 23°C

Sodium Hypochlorite solution (10% by mass), 23°C

Sodium Carbonate solution (20% by mass), 23°C

Sodium Carbonate solution (2% by mass), 23°C

Zinc Chloride solution (50% by mass), 23°C

Other

Ethyl Acetate, 23°C

Hydrogen peroxide, 23°C

DOT No. 4 Brake fluid, 130°C

Ethylene Glycol (50% by mass) in water, 108°C

1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C

50% Oleic acid 50% Olive Oil, 23°C

Water, 23°C

Water, 90°C

Phenol solution (5% by mass), 23°C

DIAGRAMS

联系方式

苏州寅旭塑化有限公司

联系人：

邓先生

服务热线：

Ꝉ쐷ꝈꝈꉐ뎁잒Ꝉ데데쁶

쉅뎁Ꝉ-Ꝉ쐷ꝈꝈꉐ뎁잒Ꝉ데데쁶

公司地址：

中国江苏苏州太仓市浮桥镇华东国际塑化城9-3栋13号

该企业其他产品

供应英力士ABS Lustran 556 低光泽￥15.5元
ABS EGP-7 英力士ABS￥15.5元
英力士高光ABS Lustran 451 ￥18.5元
供应Terluran ABS GP-22 GP-35 英力士标准通用级￥13.5元
锦湖ABS HU600PF喷涂级￥21.5元
锦湖ABS H2938L耐热喷涂级￥21.5元
锦湖ABS HU651耐热耐候￥21.5元
锦湖ABS HU601耐热￥21.5元

牌号	ZYTEL	厂商	杜邦
产地	新加坡、美国	填充	否
脱模剂	是	热稳级	73G15HSL
现货	是	加工级别	注塑
润滑级	73G15L

供应PA6 杜邦15%玻纤增强73G15L 73G15HSL

Zytel? 73G15L NC010

PRODUCT INFORMATION

REGULATORY

RHEOLOGICAL PROPERTIES

MECHANICAL PROPERTIES

THERMAL PROPERTIES

FLAMMABILITY

OTHER PROPERTIES

VDA PROPERTIES

INJECTION

CHEMICAL MEDIA RESISTANCE

DIAGRAMS

客服热线：

爱采购专线：

塑胶相关专线：