TR-556 韩国LG化学透明级抗化学性ABS塑料

找现货ABS塑料 采购现货认准江尚塑胶, 江尚塑胶专业从事国内外塑胶原料进出口销售及批发业务,ABS塑胶原料专业供应商,品类齐全,现货供应,闪电发货,价格实惠, 货源稳定,售后完善,欢迎来电订购!

【上海江尚公司主营】：通用塑料,工程塑料,热塑弹体,热固性塑料等

ABS(丙烯腈丁二烯苯乙烯)TR-556/LG化学

• 特性：透明,抗化学性

• 用途：电气/电子应用领域,大型家用电器和小型家用电器

• 加工方法：注塑,挤出

• 参数：熔流率（熔体流动速率）:5.0G/10 MIN 抗张强度:462.0KG/CM2 伸长率:72.0% 弯曲强度:703.0KG/CM2 弯曲模量:20500.0KG/CM2

• 
  

  韩国LG ABS
  1 .General ABS
  GRADE	Application
  AP163	Injection Molding, Permanent Anti-Static	注塑成型，永久防静电
  HF380	Injection Molding, High Flow	注射成型，高流量
  HF380G	Injection Molding, High Flow	注射成型，高流量
  HF380I	Injection Molding, High Flow, Good Paintability	注塑成型，高流动性，良好的可修饰性
  HF380NS	Injection Molding, High Flow,General Anti-Static	注塑成型，高流量，一般防静电
  HF380U	Injection Molding, High Flow, Good Weatherability	注塑成型，高流动性，良好的耐候性
  HG173	Injection Molding, High Surface Gloss	注塑成型，高表面光泽度
  HI100	Injection Molding, High Impact	注塑成型，高冲击
  HI100H	Injection Molding, High Impact, High Toughness	注塑成型，高冲击，高韧性
  HI121	Injection Molding, Well Balanced Mechanical Properties	注塑成型，机械性能良好
  HI121H	Injection Molding, High Stiffness	注射成型，高刚度
  HI121U	Injection Molding, Well Balanced Mechanical Properties, Good weatherability	注射成型，机械性能均匀，耐候性好
  HI153	Injection Molding, High Flow, Good Weatherability	注塑成型，高流动性，良好的耐候性
  HT700	Injection Molding, High Stiffness	注射成型，高刚度
  PT270	Injection Molding, Good Paintability	注塑，喷涂性能良好
  SG175	Injection Molding, Super Surface Gloss	注射成型，超表面光泽度
  SG175G	Injection Molding, Super Surface Gloss, High Flow	注射成型，超高表面光泽度，高流动性
  2.MA ABS
  GRADE	Application
  MA201	Injection Molding, Extrusion Molding, General Purpose, Low Gloss	注塑成型，挤出成型，通用，低光泽
  MA210	Extrusion Molding, General Purpose, Low Gloss	挤出成型，一般用途，低光泽
  3.Anti-Scratch ABS
  GRADE	Application
  MABS XG568	Injection Molding, Anti-Scratch, High Gloss	注射成型，抗划伤，高光泽
  MABS XG569C	Injection Molding, Anti-Scratch, High Gloss	注射成型，抗划伤，高光泽
  MABS XG570	Injection Molding, Anti-Scratch, High Impact, High Flow	注塑成型，抗划伤，高冲击，高流动性
  3.Extrusion ABS
  GRADE	Application
  MU620	Extrusion Molding, Low Deformation	挤压成型，低变形
  PI641	Extrusion Molding, General Purpose, High Impact	挤出成型，通用，高冲击
  PI642G	Extrusion Molding, General Purpose, High Modulus	挤出成型，通用，高模量
  RS650	Extrusion Molding, General Purpose	挤出成型，通用性
  RS657L	Extrusion Molding, Chemical Resistnace to Cyclopentane, Low Specific Gravity	挤压成型，化学性环戊烷，低比重
  RS800D	Extrusion Molding, High Impact, Chemical Resistnace to HCFC	挤出成型，高冲击，化学性HCFC
  RS800M	Extrusion Molding, High Modulus, Chemical Resistnace to HCFC	挤出成型，高模量，化学性HCFC
  RX710	Injection Molding, Chemical Resistance to HCFC, High Impact	注塑成型，耐化学性，HCFC，高冲击
  SH610A	Extrusion Molding, General Purpose, High Impact	挤出成型，通用，高冲击
  SH610S	Extrusion Molding, Excellent Surface, High Impact	挤出成型，优良的表面，高冲击
  SH625	Extrusion Molding, High Impact, High Flow	挤出成型，高冲击，高流动性
  4.Blow Molding
  GRADE	Application
  BM662	Blow Molding, Heat Resistance	吹塑，耐热性
  BM662B	Blow Molding, Heat Resistance	吹塑，耐热性
  5.Low Gloss ABS
  GRADE	Application
  LG703W	Injection Molding, Low Gloss, Heat Resistance	注射成型，低光泽，耐热性
  LG704W	Injection Molding, Low Gloss, Heat Resistance	注射成型，低光泽，耐热性
  LG709W	Injection Molding, Low Gloss, Heat Resistance	注射成型，低光泽，耐热性
  LG749W	Injection Molding, Low Gloss, Heat Resistance	注射成型，低光泽，耐热性
  6.Metal Plate ABS
  GRADE	Application
  MP211	Injection Molding, High Flow, Metal Plating	注射成型，高流动性，金属镀
  MP220	Injection Molding, High Adhesion, Metal Plating	注射成型，高附着力，金属镀
  7.Heat Resistant ABS
  GRADE	Application
  ER451	Injection Molding, Heat Resistance	注射成型，耐热性
  ER460	Injection Molding, Medium Heat Resistance, High Flowability	注射成型，中等耐热性，高流动性
  ER461	Injection Molding, Heat Resistance	注射成型，耐热性
  XR401	Injection Molding, Heat Resistance	注射成型，耐热性
  XR401B	Injection Molding, High Flow, Heat Resistance	注射成型，高流动性，耐热性
  XR401F	Injection Molding, Heat Resistance	注射成型，耐热性
  XR401LE	Injection Molding, Heat Resistance	注射成型，耐热性
  XR401T	Injection Molding, Heat Resistance	注射成型，耐热性
  XR404	Injection Molding, Heat Resistance	注射成型，耐热性
  XR404HJ	Injection Molding, Heat Resistance, Curl Fit	注塑，耐热，卷曲配合
  XR404T	Injection Molding, Heat Resistance	注射成型，耐热性
  XR407E	Injection Molding, Heat Resistance	注射成型，耐热性
  XR409E	Injection Molding, Heat Resistance	注射成型，耐热性
  XR409H	Injection Molding, Heat Resistance	注射成型，耐热性
  XR419	Injection Molding, Heat Resistance, Chemical Resistance	注塑，耐热，耐化学性
  XR440	Injection Molding Grade, Low Emission High Heat ABS	注塑级，低排放，高热量
  XR474	Injection Molding, Heat Resistance	注射成型，耐热性
  XR490	Injection Molding, Heat Resistance, Low Emisson	注射成型，耐热性，低排放
  XR404(AUTO)	Injection Molding, Heat Resistance	注射成型，耐热性
  XR404T(AUTO)	Injection Molding, Heat Resistance	注射成型，耐热性
  8.Flame Retardant ABS
  GRADE	Application
  AF312A	Injection Molding	注射成型
  AF312B	Injection Molding	注射成型
  AF312C	Injection Molding	注射成型
  AF364	Injection Molding	注射成型
  AF365	Injection Molding	注射成型
  AF365F	Injection Molding	注射成型
  EF378L	Injection Molding	注射成型
  9.MABS
  GRADE	Application
  MABS-TR551	Injection Molding, High Transparency, High Rigidity, High Hardness	注塑成型，高透明度，高硬度，高硬度
  MABS-TR552	Injection Molding, Transparency, High Impact, Chemical Resistance	注塑成型，透明性，耐冲击，耐化学性
  MABS-TR556	Injection Molding, Extrusion Molding, Transparency, Chemical Resistance	注塑成型，挤出成型，透明性，耐化学性
  MABS-TR557	Injection Molding, High Transparency, High Impact	注塑成型，高透明度，高冲击
  MABS-TR558A	Injection Molding, Transparency, General Purpose	注塑成型，透明性，通用性