大连中江生物质燃烧机 生物质颗粒燃烧机包安装调试

生物质燃烧机，燃烧成本比电节省75%、比燃油节省60%、比天然气节省50%、比液化气节省40%，且零污染。生物质燃烧机内胆，采用锆硅结晶，经高压浇注后经高温炉烧制而成，需要在1000℃以上的温度烧三天，无疏松气孔，

生物质燃烧机，一种生物质半气化自动控制燃烧机，以生物质颗粒、木屑、木粉、锯末等有机生物质为燃料的生物质高温裂解燃烧机，一般分为风冷式生物质燃烧机和水冷式生物质燃烧机两种机型。

主要特点编辑

无污染环保效益明显：以可再生生物质能源为燃料，实现能源的可持续利用。采用高温分段燃烧技术，烟气中NOX、SO2、灰尘等排放低，是燃油（气）燃烧机、电加热等的替代品。

无焦油、废水等各种废弃物排放：采用高温裂解燃烧技术，焦油等以气态的形式直接燃烧，解决生物质气化焦油含量高的技术难题，避免了水洗焦油带来的水质二次污染。

加热温度高：技术采用二次配风，炉压在500—700mm水柱以保证射流区正常流化。连续供料连续生产，火焰稳定，高温段温度可达1300℃，被工业广泛应用。

设备应用范围广：生物质燃烧机适用于涂装线体、电镀厂烤炉、锅炉、小型电站锅炉、工业窑炉、焚烧炉、熔炼炉、压铸机、烘干设备、厨房设备、干燥设备、食品烘干设备、熨烫设备、烤漆设备、公路筑路机械设备、工业退火炉、燃油，燃气，燃煤大吨位锅炉，沥青加热设备等各种热能行业。

投资、运行费用低：生物质燃烧机构设计合理，用于各种设备时改造费用低，运行时比燃油锅炉加热成本降低60%以上，比燃气锅炉加热成本降低40%以上，是电炉、油炉、气炉节能环保改造、更新换代的选择。

操作简单、维护方便：采用变频自动给料，风力除灰，操作简单，工作量小，单人值班即可，生物质燃烧机是广大锅炉企业的选择。

燃料来源广：本燃烧机以木质、木屑颗粒为原料，热值高，且避免了秸秆颗粒容易发生结焦现象的发生。

1、使用燃料：木屑颗粒或秸秆颗粒生物质燃料；

2、燃烧完***率高：沸腾式半气化燃烧加切线旋流式配风设计，使得燃料及燃烧完全，燃烧效率可达90%以上；

3、燃烧完全、稳定：设备在微压状态下运行不发生回火和脱火现象；

4、热负荷 调节范围宽：燃烧机热负荷可在额定负荷的30%-120%范围内快速调节，起动块反应灵敏；

5、无污染环保效益明显：以可再生生物质能源为燃料，实现了能源的可持续利用。采用低温分段燃烧技术、烟气中氮的氧化物、二氧化硫、灰尘等排放低，是煤炉等的替代品；

6、无焦油、废水等各种废弃物排放：采用高温燃气直接燃烧技术，焦油等以气态的形式直接燃烧， 解决了生物质气化焦油含量高的技术难题，避免了水洗焦油带来的水质二次污染；

7、操作简单、维护方便：采用自动给料，风力除灰，操作简单，工作量小，单人值班即可；

8、投资省，运行费用低：生物质燃烧结构设计合理，用于各种锅炉时改造费用低。

The combustion cost of biomass combustion machine is 75% less than electricity, 60% less than fuel oil, 50% less than natural gas, 40% less than LPG, and zero pollution. The inner tank of biomass combustion machine is made of zirconium silicon crystal, which is made by high-pressure pouring and then fired in a high-temperature furnace. It needs to be burned for three days at a temperature of over 1000 ℃ without loose pores,

Biomass combustion machine, a semi gasification automatic control combustion machine, uses biomass particles, wood chips, wood powder, sawdust and other organic biomass as fuel for high-temperature pyrolysis combustion of biomass. It is generally divided into two types: air cooled biomass combustion machine and water-cooled biomass combustion machine.

Major features editor

The pollution-free environmental benefits are obvious: renewable biomass energy is used as fuel to realize the sustainable utilization of energy. The high temperature staged combustion technology is adopted, and NOx, SO2, dust and other emissions in flue gas are low, which are the substitutes of fuel (gas) combustion machine and electric heating.

No tar, waste water and other waste emissions: high temperature pyrolysis combustion technology, tar and other direct combustion in the form of gas, to solve the technical problems of high tar content in biomass gasification, and avoid secondary pollution of water quality caused by water washing tar.

High heating temperature: secondary air distribution is adopted in the technology, and the furnace pressure is 500-700mm water column to ensure the fluidization of the jet area. Continuous feed continuous production, flame stability, high temperature section temperature up to 1300 ℃, widely used in industry.

The equipment is widely used: biomass combustion machine is suitable for coating line, electroplating plant oven, boiler, small power plant boiler, industrial kiln, incinerator, smelting furnace, die casting machine, drying equipment, kitchen equipment, drying equipment, food drying equipment, ironing equipment, paint equipment, road construction machinery equipment, industrial annealing furnace, fuel oil, gas, coal-fired large tonnage boiler, Asphalt heating equipment and other thermal industries.

Low investment and operation cost: the biomass combustion mechanism is reasonably designed, and it is low for various equipment, and the heating cost of fuel fired boiler is reduced by more than 60% and 40% lower than that of gas boiler during operation. It is the choice of energy saving and environmental protection transformation and renewal of electric furnace, oil furnace and gas furnace.

Simple operation and convenient maintenance: adopt frequency conversion automatic feed, wind power ash removal, simple operation, small workload, single person on duty, biomass combustion machine is the choice of the majority of boiler enterprises.

Fuel source: this combustion machine uses wood and wood chips as raw materials, with high heat value, and avoids the coking phenomenon of straw particles.

1. Fuel used: wood chip particles or straw particles biomass fuel;

2. High combustion rate: boiling semi gasification combustion and tangential swirl air distribution design, which makes the fuel and combustion complete, and the combustion efficiency can reach more than 90%;

3. Combustion is complete and stable: the equipment does not temper and de fire when it is running under micro pressure;

4. Wide range of heat load regulation: the thermal load of the combustion machine can be adjusted rapidly within 30% to 120% of the rated load, and the reaction of the starting block is sensitive;

5. The pollution-free environmental benefits are obvious: renewable biomass energy is used as fuel to realize the sustainable utilization of energy. The low temperature staged combustion technology, low emission of nitrogen oxides, sulfur dioxide and dust in flue gas are the substitutes of coal furnaces;

6. The technology of direct combustion of high temperature gas and tar are directly burned in the form of gas, which solves the technical problems of high tar content in biomass gasification and avoids secondary pollution of water quality caused by water washing tar;

7. Simple operation and convenient maintenance: automatic feeding, wind dust removal, simple operation, small workload, single person on duty;

8. Low cost of operation: the biomass combustion structure is designed reasonably and the cost of reforming is low when used in various boilers