美国TABER泰伯996-光学千分尺996A-光学观微仪996A1

美国TABER泰伯996?光学千分尺996A?光学观微仪996A1

?

?

光学测微仪? ? ?表面测量

?

手持便携式仪器测量

一定范围的表面损伤。

光学千分尺将测量并评估宽度或划痕，裂缝，凹陷，腐蚀，凹痕和其他深度

各种材料都有瑕疵。另外，可以使用量化马刺和其他小突起的高度。

对于透明材料，此仪器可用于测量厚度，开裂深度，断裂深度和宽度嵌入的空隙。

?

简单的设计可提供准确的结果。

易读的游标尺是所有光学深度的标准配置千分之一，千分之一，千分之一

和十分之一。为了读取数据，操作员旋转千分尺套管直到该区域的主表面到来

成为焦点。随后的读数在不同的焦点深度以相同的方式制作。根据型号，光学

千分尺精确到±0.0002英寸。

?

适应凸，凹和复合轮廓。

仪器坚固耐用，非常适合野外使用应用程序。使用可互换的底座之一，几乎可以测量任何表面-挡风玻璃，机身，机身蒙皮，螺旋桨叶片，转子叶片，涡轮叶片，还有更多。

?

?

?

显示：光学测微仪套件（966A1型）–包括5倍和10倍可互换光学元件，20倍

目镜单元，标线片目镜单元；另外五个底座，千分尺灯，可调光支架和外壳。

?

?

光学测微仪?表面测量仪

?

有两种型号：

966型（100功率）

建议用于需要更大工作深度的应用。使用该仪器可以读取深度为0.665英寸的读数。

可以测量厚度高达0.9975英寸的透明材料±0.0005英寸精度。

?

型号966A（200电源）

用于初级平面和简单弯曲的标准仪器表面。深度（在表面下方）读数可以达到0.260英寸

精度在±0.0002英寸以内。也会测量透明材料厚度可达0.390英寸。

?

型号966A1

包含以上两种型号的设备。

?

配件：

三脚架底座（970型）–适用于平坦，简单和复合弯曲的表面（仪器随附）

?

Quadpod Base（971型）–启用测量在凸形和/或凹形不规则曲面上

?

偏置三脚架底座（972型）–允许读数与突出障碍物相邻的平坦或弯曲表面

?

楔形两脚架底座（973型）–在平面交点处使用表面形成至少80°的角度

?

半透明V型块底座（974型）–获得读数从圆形表面或外角，也从平面邻近凹陷区

?

大型三脚架底座（975型）–用于需要比三脚架底座更大的支撑区域，非常适合小零件检查

?

十字线目镜单元（966AR型）–插入十字线目镜单元，千分尺成为光学比较器能够进行高达0.040英寸的精确宽度测量

?

精度为0.001英寸（与966A型配合使用）10x可互换光纤（966AC型）–转换模型966至966A型

?

5x可互换光学元件（966C型）–转换模型966A至966型

?

?

美国TABER泰伯划痕测试仪 光学观微仪996系列技术指标

? ? ? ? ? ? ? ? ? ? ? ? ?966型? ? ? ? ? ? ? 966A型

放大倍率? ? ? ? ? ? ? ? ? ? ?100x? ? ? ? ? ? ? 200x

光学工作距离? ? ? ? ? ? ? ? ? 0.6650”? ? ? ? ? ? 0.2600”

（深度测量）

千分尺工作距离? ? ? ? ? ? ? ? ?1.000”? ? ? ? ? ? 1.000”

材料厚度（透明）? ? ? ? ? ? ? ? 0.9975”???????? 0.3900”

精度? ? ? ? ? ? ? ? ? ? ? ? ±0.0005”????????±0.0002”

图像区域直径为? ? ? ? ? ? ? ? ?0.090英寸? ? ? ? ? 直径0.060英寸

图像焦平面? ? ? ? ? ? ? ? ? ? ±0.0002”? ? ? ? ? ±0.0001”

?

?

?

Optical Micrometer

Surface Measurement

?

Handheld, portable instrument measures

a range of surface damage.

?

The optical micrometer will measure and evaluate the width

or depth of scratches, cracks, pits, corrosion, dents and other

blemishes in a variety of materials. In addition, it can be used

to quantify the height of spurs and other small protrusions.

For transparent materials, this instrument is useful for measuring

thickness, depth of crazing, depth of fractures, and width of

embedded voids.

?

Simple design provides accurate results.

An easy-to read Vernier Scale is standard on all optical depth

micrometers and is calibrated in thousandths, ten thousandths

and hundred thousandths. To take a reading, the operator rotates

the micrometer thimble until the primary surface of the area comes

into sharp focus. Subsequent readings at varying depths of focus

are made in the same fashion. Depending on model, the optical

micrometer is accurate to ±0.0002”.

?

Adapts to convex, concave and compound contours.

With a rugged housing, this instrument is ideal for field

applications. Using one of the interchangeable bases,

practically any surface could be measured - windshields,

airframes, fuselage skin, propeller blades, rotor blades,

turbine blades, plus many more.

?

*Shown: Optical Micrometer Kit (Model 966A1) –

Includes 5x and 10x interchangeable optics, 20x

eyepiece cell, reticle eyepiece cell; five additional

bases, micrometer light, adjustable light

bracket and case.

?

?

Optical Micrometer

Surface Measuremen

?

Available in Two Models:

Model 966 (100 power)

Recommended for applications requiring greater working depth.

Depth readings to 0.665” can be made with this instrument.

Transparent materials up to 0.9975” thick can be measured with

±0.0005” accuracy.

Model 966A (200 power)

The standard instrument used for primary flat and simple curved

surfaces. Depth (below the surface) readings to 0.260” can be

made within ±0.0002” accuracy. Will also measure transparent

material thicknesses up to 0.390”.

Model 966A1

Contains equipment for both models above.

Accessories:

Tripod Base (model 970) – Intended for flat, simple and compound

curved surfaces (supplied with instrument)

Quadpod Base (model 971) – Enables measurements

on convex and/or concave irregular curved surfaces

Offset Tripod Base (model 972) – Permits readings

of flat or curved surfaces adjacent to protruding obstructions

Wedge Bipod Base (model 973) – Used when intersection of planed

surfaces form angles of at least 80°

Translucent V-Block Base (model 974) – Obtains readings

from round surfaces or external angles, also flat surfaces

adjacent to recessed areas

Large Tripod Base (model 975) – Used for applications requiring

a larger support area than the tripod base, ideal for small parts

inspection

Reticle Eyepiece Cell (model 966AR) – By inserting the reticle

eyepiece cell, the micrometer becomes an optical comparator

capable of making accurate width measurements up to 0.040”

to an accuracy of 0.001” (for use with Model 966A)

10x Interchangeable Optic (model 966AC) – converts model

966 to model 966A

5x Interchangeable Optic (model 966C) – converts model

966A to model 966

?

?

Specifications

Model 966 Model 966A

Magnification 100x 200x

Optics Working Distance 0.6650” 0.2600”

(depth measurement)

Micrometer Working Distance 1.000” 1.000”

Material Thickness (transparent) 0.9975” 0.3900”

Accuracy ±0.0005” ±0.0002”

Image Area 0.090” dia. 0.060” dia.

Image Focal Plane ±0.0002” ±0.0001”

?