尼龙 11/PA11 black/ADVANC3D Materials® GmbH 物性表
尼龙 11/PA11 black/ADVANC3D Materials® GmbH
规格用途
该料用途 | Additive Manufacturing 3D Printing |
备注说明 | AdSint® PA11 black is a bio-based material made from castor oil. The end product offers a high elongation at break, elasticity and high impact resistance. Typical applications are in environments with high mechanical stress (e.g. hinges) and special surroundings (e.g. chemical, detergents, oil). Due to its high ductility, it does not splinter in crash situations. AdSint® PA11 black has been tested on most common SLS printers. Parameters for printing will be provided. It is also available in nature and white. The refresh rate is between 35% - 50%, depending on the application. |
技术参数
性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
物理性能 | 密度 | ISO 61 | 23°C | 킗. 到 킗.킗 | g/cm³ | 表观密度 2 | ISO 1068 | .큶킗 到 .덀킗 | g/cm³ | 吸水率 | ISO 62 | 平衡, 23°C, 50% RH | .픣 到 킗.킗 | % | 颗粒大小分布 | ISO 13320 | Course Particles <15 µm | < 킗 | % | Course Particles >76 µm | < 킗 | % |
硬度 | 肖氏硬度 | ISO 868 | 邵氏 D, 20°C | 덀뤓 到 덀덀 | |
机械性能 | 拉伸模量 | ISO 527-2/1B | 킗뤓렒 到 킗눉렒 | MPa | 拉伸应力 | ISO 527-2/1B | 断裂 | ꌈ뤓. 到 ꌈ픣. | MPa | 拉伸应变 | ISO 527-2/1B | 断裂 | 렒ꌈ 到 ꌈ | % | 弯曲模量 | ISO 178 | 23°C | 킗뤓 到 킗뤓뤓 | MPa |
冲击性能 | 简支梁无缺口冲击强度 | ISO 179/1eU | 23°C | 킗 到 킗큶 | kJ/m² |
热性能 | 热变形温度 | 0.45 MPa, 未退火 | ISO 75-2/B | 킗ꌈ눉 到 킗뤓 | °C | 1.8 MPa, 未退火 | ISO 75-2/A | 뤓렒. 到 뤓덀. | °C | 玻璃转化温度 3 | ISO 11357-2 | 렒픣. 到 ꌈ렒. | °C | 熔融温度 | ISO 11357-3 | -- 4 | 킗눉눉 到 킗픣 | °C | -- 5 | 킗픣픣 到 렒 | °C | Mean Diameter | ISO 13320 | ꌈ. | µm |
温馨提示:此数据表中的信息由塑胶网从该材料的生产商处获得,塑胶网尽最大努力确保此数据的准确性,但是塑胶网对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。