FEP/FEP 9835/The Chemours Company 物性表
FEP/FEP 9835/The Chemours Company
规格用途
该料用途 | 薄壁绝缘; 低压绝缘; 电线电缆应用; 通信电线绝缘材料 |
备注说明 | DuPont™ Teflon ® FEP 9835 is a melt-processible fluoroplastic resin available in pellet form. It is a copolymer of tetrafluoroethylene and hexafluoropropylene, without additives, that meets the requirements of ASTM D 2116 type II. With a relatively high melt flow rate and excellent electrical properties, Teflon ® FEP 9835 has been specifically designed for high-speed extrusion of thin coatings on small-gauge wires for twisted-pair constructions. This resin provides the electrical and mechanical properties needed for low voltage applications. In addition, Teflon ® FEP 9835 has a higher melt flow rate than most other fluoroplastic resins. This permits higher extrusion speeds and easier processing, making Teflon ® FEP 9835 a cost-effective alternative for producing thin-wall extrusions.Teflon ® FEP 9835 is designed and made to have improved adhesion to copper wire under specific wireline process conditions, low dissipation factor at high frequencies, and to have significant plate-out resistance in melt extrusion. It is suitable as a solid insulator, and as a foamed insulator when used with an appropriate nucleant in a nitrogen gas injection process.Teflon ® FEP 9835 is used when traditional extrusion and molding processes are required for producing products with the superior properties of a fluoroplastic resin. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ® FEP 9835 can be used to improve processing rates. Compared with other fluoroplastics, creep resistance at high service temperatures provides a superior balance and level of end-use properties. Teflon ® FEP 9835 combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene. Properly processed products made from neat Teflon ® FEP 9835 resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.In a flame situation, products of Teflon ® FEP 9835 resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke. |
技术参数
性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
物理性能 | 密度 / 比重 | ASTM D792, ISO 1183 | .삘햄 | g/cm³ | 熔流率(熔体流动速率) | ASTM D2116, ISO 12086 | 372°C/5.0 kg | 퐧 | g/10 min | 吸水率 | ASTM D570 | 24 hr | < 퐧.퐧삘퐧 | % |
硬度 | 肖氏硬度 | ASTM D2240, ISO 868 | 邵氏 D | 댡댡 | |
热性能 | 熔融温度 | ASTM D4591 | 댡댡 | °C | |
可燃性 | UL 阻燃等级 | UL 94 | -퐧 | 极限氧指数 | ASTM D2863, ISO 4589-2 | > 댡 | % | Critical Shear Rate | 内部方法 | 372°C | 삘댡퐧 | sec^-1 | MIT Folding Endurance - 8 mil film | ASTM D2176 | 200.0 µm | 삘.+햄 | Cycles |
电气性能 | 介电强度 | 0.250 mm, 方法A(短时间) 2 | ASTM D149 | ꜁퐧 | kV/mm | 0.250 mm 3 | IEC 60243-1 | ꜁퐧 | kV/mm | 介电常数 | IEC 60250 | 1 MHz | ASTM D150 | .퐧팠 | 1.00 GHz | ASTM D2520 | .퐧팠 | 耗散因数 | IEC 60250 | 1 MHz | ASTM D150 | 왁.퐧-햄 | 1.00 GHz | ASTM D2520 | 댡.퐧-햄 |
机械性能 | 抗张强度 | ASTM D638, ISO 12086 | 23°C | 햄.퐧 | MPa | 伸长率 | ASTM D638, ISO 12086 | 断裂, 23°C | 팠퐧퐧 | % | 弯曲模量 | ASTM D790A, ISO 178 | 23°C | 댡퐧 | MPa |
温馨提示:此数据表中的信息由塑胶网从该材料的生产商处获得,塑胶网尽最大努力确保此数据的准确性,但是塑胶网对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。