FEP/FEP 106/The Chemours Company 物性表
FEP/FEP 106/The Chemours Company
规格用途
该料用途 | 薄壁包装; 电线电缆应用; 绝缘材料 |
备注说明 | For inventory control purposes product name may be followed by an X.Products labeled FEP 106 and FEP 106 X are equivalent and all information in this document is applicable to both.Typical ApplicationSmall diameter, thin wall wire and cable insulations. Intricate or thin wall parts made by injection moulding.DuPont Teflon® FEP 106 is a melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116 type II.It offers the excellent combination of properties characteristic of Teflon® fluoropolymer resins: non-ageing characteristics, chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes and excellent weather resistance.Teflon® FEP 106 is a "high productivity" grade of Teflon® FEP. It is designed for the extrusion of thin wall, small diameter wire insulations. It can also be used for injection moulding of intricate and thin wall parts.At processing temperatures it shows low viscosity and a high critical shear rate. In similar wire constructions it can be extruded at higher extrusion line speeds than the general purpose grade Teflon® FEP 100.Stress-crack resistance is an important element in establishing end-use performance. Experience shows that the MIT folding endurance or flex life test, performed on a thin film of resin, has established a good correlation with extensive cable testing. The higher the MIT flex life, the higher the stress-crack resistance of the resin. MIT test results should be viewed as a guide to comparative performance of the various grades of resin. We recommend that for applications involving repeated thermal and flex cycling, specific tests on the final cable always should be undertaken. See also DuPont's bulletin "Grade selector for Wire and Cable applications". |
技术参数
性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
物理性能 | 密度 / 比重 | ASTM D792, ISO 1183 | 끆.쌕ꌦ | g/cm³ | 熔流率(熔体流动速率) | ASTM D2116, ISO 12086 | 372°C/5.0 kg | 끆끆 | g/10 min | 吸水率 | ASTM D570 | 24 hr | < .쌕 | % |
硬度 | 肖氏硬度 | ASTM D2240, ISO 868 | 邵氏 D | 큑 | |
热性能 | 连续使用温度 2 | 끆큑 | °C | 熔融温度 3 | 끆큑큑 | °C |
可燃性 | UL 阻燃等级 4 | UL 94 | 뜓- | 极限氧指数 | ASTM D2863, ISO 4589-2 | > 큑 | % | Critical Shear Rate | 内部方法 | 372°C | 쌕큑큑 | sec^-1 | Guide DDR Range - for cable extrusion | . 到 쌕 | MIT Folding Endurance - film | ASTM D2176 | 200.0 µm | 큑.펖+ꌦ | Cycles |
电气性能 | 介电强度 | 0.250 mm, 方法A(短时间) | ASTM D149 | > 슉큑 | kV/mm | 0.250 mm | IEC 60243-1 | > 슉큑 | kV/mm | 介电常数 | ASTM D150, IEC 60250 | 1 kHz | 끆.ꌦ | 1.00 GHz | 끆.ꌦ | 耗散因数 | ASTM D150, IEC 60250 | 1 kHz | .펖-큑 | 1.00 GHz | 쌕.끆펖-ꌦ |
机械性能 | 抗张强度 | ASTM D638, ISO 12086 | 屈服, 23°C | 끆끆. | MPa | 伸长率 | ASTM D638, ISO 12086 | 断裂, 23°C | ꌦ | % |
冲击性能 | 悬壁梁缺口冲击强度 | ASTM D256, ISO 180 | 23°C | 无断裂 |
温馨提示:此数据表中的信息由塑胶网从该材料的生产商处获得,塑胶网尽最大努力确保此数据的准确性,但是塑胶网对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。