山东豪沃橡塑有限公司
  • 入驻年限:2
  • 所 在 地:山东省 德州市
  • 主营产品: 超高分子量聚乙烯板、铺路垫板、支腿垫板、超高分子量聚乙烯刮板、超高分子量聚乙烯导轨、耐磨漏斗衬板、吸水箱面板、螺栓输送机内衬
vip

进入移动商铺

免费会员第 2 vip
山东豪沃橡塑有限公司
主营产品: 超高分子量聚乙烯板、铺路垫板、支腿垫板、超高分子量聚乙烯刮板、超高分子量聚乙烯导轨、耐磨漏斗衬板、吸水箱面板、螺栓输送机内衬
如实描述 用心服务 品质保障
풂ꚕ퍴꜉땠퍴ꚕ풂꜉풂휥

污水处理螺旋输送机高分子聚乙烯衬板

价格 24.00/公斤
起订量 ≥1
所在地 山东 德州 可售量 10000公斤

手机扫码快速拨号

手机扫码
免费会员 第2年

山东豪沃橡塑有限公司

联系电话:

手机号码:풂ꚕ퍴꜉땠퍴ꚕ풂꜉풂휥

公司官网: http://617q7l5x2.51pla.com

所在地区:山东省 德州市

主营产品: 超高分子量聚乙烯板、铺路垫板、支腿垫板、超高分子量聚乙烯刮板、超高分子量聚乙烯导轨、耐磨漏斗衬板、吸水箱面板、螺栓输送机内衬

进入店铺
商品详情 联系方式

基本参数

牌号 U-PE200 厂商 山东豪沃橡塑
颜色 可定制 材质 超高分子量聚乙烯
密度 0.97g/cm3 使用温度 最高80°

高分子聚乙烯衬板是用来保护筒体,使筒体免受研磨体和物料直接冲击和磨擦,同时也可利用不同形式的衬板来调整研磨体的运动状态,以增强研磨体对物料的粉碎作用,有助于提高磨机的粉磨效率,增加产量,降低金属消耗。

螺旋输送机衬板.jpg

超高分子量聚乙烯具有许多优异的性能,然而如此优异的工程塑料却很少有人知道它的存在,这主要是由于以前对超高分子量聚乙烯的熔体特性研究不足,加工方法基本上还停留在落后的压制一烧结工艺上。近年来随者超高分子量聚乙烯加工技术的不断发展,其制品己在许多领域中获得了成功的应用

01354.jpg

QQ截图20220416174224.jpg

螺旋输送机聚乙烯衬板特点:

1、高耐磨性,摩擦系数低,表面光滑无粗糙,防止物料流动受阻;
2、不吸水性,不受物料湿度的影响,也不会因为吸水而造成物料结痂成块;
3、自润滑性,让粘结性大、不易自由流动的散装物料能够顺畅流动;
4、耐磨损性,保护设备,不受物料腐蚀引起设备故障;
5、重量轻,仅是钢材重量的七分之一,易于操作和运输;
6、环保材质,具有生理惰性和生理适应性,可回收再利用;
7、耐化学腐蚀性能,能耐一定浓度下的酸碱盐等的腐蚀,化学性能稳定。

QQ截图20220416165750.jpg

The high molecular polyethylene lining plate is used to protect the cylinder from the direct impact and friction of the grinding body and materials. At the same time, different types of lining plates can also be used to adjust the movement state of the grinding body to enhance the grinding effect of the grinding body on materials, which helps to improve the grinding efficiency of the mill, increase the output and reduce the metal consumption.

Ultra high molecular weight polyethylene (UHMWPE) has many excellent properties. However, few people know its existence of such excellent engineering plastics. This is mainly due to the lack of research on the melt characteristics of UHMWPE in the past, and the processing method basically remains in the backward pressing sintering process. In recent years, with the continuous development of UHMWPE processing technology, its products have been successfully applied in many fields

Characteristics of polyethylene lining plate of screw conveyor:

1. High wear resistance, low friction coefficient, smooth surface without roughness, preventing material flow from being blocked;

2. No water absorption, not affected by the humidity of the material, and will not cause the material to scab and block due to water absorption;

3. Self lubricating, allowing bulk materials with high adhesion and not easy to flow freely to flow smoothly;

4. Wear resistance, protect equipment from material corrosion and equipment failure;

5. Light weight, only one seventh of the steel weight, easy to operate and transport;

6. Environmental protection material, with physiological inertia and physiological adaptability, can be recycled;

7. Chemical corrosion resistance: it can resist the corrosion of acid, alkali and salt at a certain concentration and has stable chemical performance.

该企业其他产品
  • 山东豪沃橡塑绿色超高分子量聚乙烯板¥22元

  • 山东豪沃橡塑绿色高分子量支腿垫板¥22元

  • 山东豪沃超高分子量聚乙烯足球回弹板¥22元

  • 山东豪沃防腐耐磨超高分子聚乙烯板¥22元

  • 山东豪沃橡塑超高分子量聚乙烯可循环利用铺路板¥22元

  • 豪沃橡塑超高分子量聚乙烯含硼超高分子量聚乙烯板¥23元

  • 山东豪沃不堵仓超高分子量聚乙烯料仓衬板¥22元

  • 豪沃超高分子量聚乙烯抗紫外线护舷贴面板¥23元

免责声明:以上展示的污水处理螺旋输送机高分子聚乙烯衬板信息由山东豪沃橡塑有限公司自行提供,内容的真实性、准确性和合法性由发布企业负责, 全球塑胶网对此不承担责任。
风险防范建议:为保障您的利益,建议优先选择速购通会员
手机版:污水处理螺旋输送机高分子聚乙烯衬板
更新产品链接为:https://www.51pla.com/html/sellinfo/495/49520000.htm