101-GF03 英力士耐高温高光泽耐油PP塑料

PP聚丙烯塑料现货 采购认准江尚塑胶, 上海江尚塑胶专业从事国内外塑胶原料进出口销售及批发业务,塑胶原料专业供应商,品类齐全,现货供应,闪电发货,价格实惠, 货源稳定,售后完善,欢迎来电订购!

【上海江尚公司主营】：通用塑料,工程塑料,热塑弹体,热固性塑料等.

• 英力士PP：
  型号	溶指(230°C/2.16kg)	特性
  3950	34	High flow impact copolymer for automotive interiors
  H00G-00	0.7	High stiffness grade for containers such as auto under-hood reservoirs
  H01H-00	1.7	Long-term heat aging homopolymer grade for thermoformed sheet
  H02C-00	2.3	High clarity, nucleated homopolymer grade for thermoformed packaging
  H02C-01	2.3	Low plate-out, high clarity, nucleated homopolymer grade for thermoforming
  H02C-04	2.3	Thermoforming grade with new nucleator technology providing enhanced clarity
  H02G-02	2	General purpose homopolymer for BOPP, tape, twine, woven bag andthermoformed sheet
  H03G-00	3.5	General purpose homopolymer extrusion grade
  H03G-02	3.5	General purpose homopolymer fiber grade
  H03G-06	3	Homopolymer designed for BOPP applications
  H03W-00	3.5	General purpose low water carry-over homopolymer grade
  H03W-01	3.6	Low water carry-overhomopolymer for cordage, carpet backing, industrial fabrics, and geotextiles
  H04W-01	4.2	Designed for extrusion processing in applications that require low water carry-over.
  H05A-00	5.1	Antistated, general purpose homopolymer for closures and tubing
  H05H-01	5.6	Long-term heat aging homopolymer for appliances and automotive
  H07N-00	7.3	Barefoot homopolymer with nucleation designed for extrusion processing
  H08U-00	8.0	Designed for fiber spinning applications requiring UV protection.
  H12E-00	12.5	Homopolymer grade with high antistat level for closure applications
  H12G-00	12	General purpose homopolymer for consumer and closure applications
  H12G-01	12	General purpose homopolymer suitable for extrusion and injection molding. Uses include extruded sheet, BOPP film, housewares, rigid packaging, caps and closures
  H12Z-00	12	Antistated, nucleated homopolymer for consumer closure applications
  H12Z-02	12.8	Antistated, nucleated homopolymer for closure applications
  H12Z-03	12	Antistated, nucleated homopolymer designed for optimal processing and surface appearance in injection molding applications
  H13M-00	13.5	Medium-term heat aging homopolymer for packaging, closures consumer products
  H14A-00	14.3	Antistated homopolymer for packaging, closures consumer products
  H19G-01	19	General purpose fiber grade homopolymer
  H20A-00	20	Injection molding grade with moderate levels of antistat
  H20E-00	20	Injection molding grades with high level of antistat
  H20H-00	20.5	Long-term heat aging homopolymer for appliances, consumer, housewares, and rigid packaging
  H28E-00	28	Homopolymer with high antistat levels for consumer, rigid packaging and closures applications
  H35G-00	35	General purpose, high flow homopolymer for rigid packaging and housewares
  H35Z-00	35	Antistated, nucleated, high flow homopolymer for rigid packaging and housewares
  H38G-02	38	Homopolymer for spunbonded nonwovens and partially oriented yarn (POY)
  H44N-00	47	High flow rate, nucleated polypropylene to improve isotropic shrinkage and prevent warpage
  H53N-00	53	Nucleated high MFR homopolymer with lubricant for high speed injection molding applications, such as media and thin walled packaging and housewares
  L10G-00	10	General impact grade designed for injection molding applications
  L12N-00	12	High gloss, nucleated impact copolymer for automotive, consumer and housewares applications
  L12Z-00	12	Antistatted and nucleated impact copolymer for housewares, consumer products and toys
  L12Z-01	12	High gloss, nucleated and antistatted impact copolymer for automotive, toys, consumer and housewares applications
  L34N-00	34	Nucleated, low gloss impact copolymer for housewares and consumer products
  L70J-00	70	High melt flow, nucleated with a light antistat package for thin-walled containers exhibiting high length-to-thickness ratio
  L70Z-01	70	Nucleated, antistated, high flow, medium impact impact coplymer for injection molding applications
  N00G-01	0.45	Good balance of stiffness and impact for sheet extrusion.
  N00M-00	0.45	Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging
  N00N-00	0.35	High-impact impact copolymer designed for non-pressure structured wall pipe
  N01N-00	1.9	Impact copolymer with good stiffness/impact balance for freezer-to-microwave thermoformed packaging
  N02G-00	2.5	Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging
  N02J-00	1.9	Impact copolymer with good stiffness/impact balance for freezer-to-microwave thermoformed packaging
  N05U-00	5	UV stabilized grade for materials handling
  N12N-00	12	Nucleated grade with good stiffness/impact balance for compounding and injection molding applications.
  N12Z-00	12	Nucleated and antistated impact copolymer designed for injection molding applications.
  N20G-00	20	Impact copolymer with good stiffness/impact balance for toys andconsumer products
  N20N-00	20	Nucleated and antistattedimpact copolymer with good stiffness/impact balance for materials handling, toys and consumer products
  R01A-00	1.9	Balance of stiffness, impact, contact clarity; suitable for hot fill
  R01C-00	1.9	Clarified grade with balance of stiffness, impact; suitable for hot fill
  R01C-01	1.9	Clarified, low plate-out grade with balance of stiffness, impact; hot fill
  R08G-00	8	Film, blow molding, expanded PP beads, injection molding
  R08S-00	8 .0	Random copolymer with slip agent
  R12C-01	12	Low antistat, clarified grade for injection stretch blow molding
  R35C-01	35	Antistated version of R35C-00
  R35C-02	35	Clarified and lubricated random copolymer for medium and thin wall molding applications giving a bluish hue of enhanced and distinctive clarity
  R35C-03	35	Thin wall clear parts
  R55C-00	55	Clarified and antistatic random copolymer for thin wall molding applications requiring very good mold filling capabilities, excellent clarity, fast cycle times and good stiffness-to-impact properties balance
  T00G-00	0.6	Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications
  T00G-02	0.6	Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications
  T10G-03	10	TPO designed for roofing, compounding and soft applications

  
  

• 

• 

• 

•