PS (HIPS)/Prime Clear-X 200/Primex Plastics Corporation 物性表
PS (HIPS)/Prime Clear-X 200/Primex Plastics Corporation
规格用途
该料用途 | 个人护理; 包装; 医疗/护理用品; 支架托盘; 消费品应用领域; 玩具; 电气/电子应用领域; 硬包装; 药物 |
备注说明 | This material was designed and developed specifically for rigid packaging markets. Prime Clear-X 200 offers a remarkable combination of toughness, clarity, stiffness, tear resistance, low stress whitening, cost and good hinge properties.Applications:The above features make this product suitable for retail clam shell packaging. Applications include electronics, toys, pharmaceutical, medical, personal care and consumer goods. It is rated for medical tray applications (USP Class VI-500) and meets FDA regulation 21 CFR 177.1640.Processing:For the fabricator, Prime Clear-X 200 is easily and economically processed using conventional processing techniques. Options for part denesting include use of a silicone bath during sheet production or an internal denest additive.Finishing:Options for the joining and bonding of Prime Clear-X 200 include heat sealing, solvent bonding, ultrasonic welding and adhesive bonding. RF Welding is not recommended. Trim tooling should be sharp and clear of burrs for a clean cut. Dull trim tooling will result in "fuzz" trim. This product can be sterilized by three types of processes; Gamma, EtO, and E-Beam.Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process.Colors, Textures and Capabilities:Prime Clear-X 200 is compatible with HIPS or GP carriers so it may be color matched to meet your specific requirements. Textures are available but smooth is the primary surface. |
技术参数
性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
物理性能 | 密度 / 比重 | ASTM D792 | ꥢ. | g/cm³ | 收缩率 - 流动 | . 到 .ꍐ | % |
光学性能 | 雾度 | ASTM D1003 | . 到 . | % | |
机械性能 | 抗张强度 | ASTM D638 | 屈服, 0.762 mm | ꥢ.ꍐ | MPa | 伸长率 | ASTM D638 | 断裂, 0.762 mm | | % | 弯曲模量 | ASTM D790 | 0.762 mm | ꥢꍐ줵 | MPa | 弯曲强度 | ASTM D790 | 0.762 mm | . | MPa |
冲击性能 | 装有测量仪表的落镖冲击 | ASTM D3763 | Total Energy | 줰.ꥢꤴ | J |
热性能 | 载荷下热变形温度 | ASTM D648 | 0.45 MPa, 未退火, 0.762 mm | ꍐꈓ.ꍐ | °C | 维卡软化温度 | ASTM D1525 | 줰. | °C |
温馨提示:此数据表中的信息由塑胶网从该材料的生产商处获得,塑胶网尽最大努力确保此数据的准确性,但是塑胶网对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。